User manual FUJITSU C2330

[. . . ] Copyright Copyright and Trademark Information Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. The absence of a product or service name, slogan, or logo does not constitute a waiver of any trademark or other intellectual property rights relating to that name, slogan, or logo owned by Fujitsu Computer Systems Corporation, its parent, subsidiaries, and affiliated companies. Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited. [. . . ] If you are using Cisco CCX, click Cisco Options to enable Cisco CKIP data encryption on the Security Settings page. If you have checked the Cisco's "Mixed-Cell" box in the Advanced Setting, this option must also be checked. Click Next. 3. Configure network settings TCP/IP settings Workgroup or Domain settings. CONFIGURATION USING INTEL PROSET FOR WIRELESS UTILITY This section explains the procedure to properly configure the WLAN device using the Intel PROSet for Wireless utility. Please consult with your network administrator for these parameters: Network Name - Also known as the SSID Network Key (WEP) - Required if using static WEP keys. Activate the WLAN device using either the Wireless On/Off Switch or the Intel PROSet for Wireless utility. Select Open, Shared, WPA-Enterprise, WPA2Enterprise, WPA-Personal, or WPA2-Personal in the Network Authentication options. Select either None, WEP, CKIP (if Enable Cisco Client eXtentions is enabled, use CKIP or WEP), or TKIP for the data encryption. If WEP is selected, select either 64 or 128-bit for the Encryption Level. If your network does not employ a 802. 1x/EAP security mechanism, please skip to step 24. Click the Enable 802. 1x checkbox to enable the 802. 1x security option. Please contact your network administrator if configuration of this setting is required. 2. 55 LifeBook C Series Notebook - Section Five 20. Please contact your network administrator if configuration of this setting is required. After selecting authentication type, enter the name, domain, and password of the user you have created on the authentication server. The user name and password do not have to be the same as name and password of your current Windows user login. From the Intel ProSet Wireless page, click the new profile name shown in the Profile List. Use the up and down arrows to position the priority of the new profile in the priority list. Click [Close] if you want to close the Intel(R) PROSet for Wireless window. 6. Click [Internet Protocol (TCP/IP] and then click [Properties]. Set the IP address as follows: 7. For ad hoc connection: Select [Use the following IP address:] and then enter data for [IP address] and [Subnet mask]. For access point (infrastructure) connection: If your network uses DHCP, select [Obtain an IP address automatically] and [Obtain DNS server address automatically]. If your network uses static IP addresses, consult with your network administrator for the correct IP address settings. 8. Processing will return to the [Wireless Network Connection Properties] window. Following this operation, confirm the names of the computer and the workgroup as follows. [. . . ] A specific technology of making RAM which does not require periodic data refreshing. Some systems allow you to specify any SSID as an option so you can join any network. Status Indicator A display which reports the condition of some portion of your hardware. On your LifeBook notebook this is an LCD screen just above the keyboard. [. . . ]