User manual FUJITSU AOYG12KGCA

[. . . ] Before using this product, read these instructions thoroughly and keep this manual for future reference. To prevent personal injury, or property damage, read this section carefully before you use this product, and be sure to comply with the following safety precautions. Incorrect operation due to failure to follow the instructions may cause harm or damage, the seriousness of which is classified as follows: This mark warns of death or serious injury. If the refrigerant is leaked and exposed to an external ignition source, there is a risk of fire. [. . . ] 5 hour Set time Set time 1 hour On and Off timer can be combined, and up to 4 reservations (program ) per day and 28 reservations per week. Before setting the program, please set the week and time of the air conditioner first. If the week and time are not set, the weekly timer will not operate correctly at the set time. Come back home Go to sleep To set the Weekly timer, first follow steps 1 to 3 on page 6 for the On/Off timer. 4 Select the program number and the day using the "SELECT" button. Press the "NEXT" button, when the program number and day you want to set are blinking. 5 Press the "SELECT" button to select the operation mode (On timer, Off timer, or No timer operation). Example of Weekly timer 2 You can specify a given temperature in the On setting in Weekly timer. * You can set the temperature for the Auto, Cooling, or Dry mode within the range of 18-30°C, for the Heating mode the range is 10 or 16-30°C. Even if you set to 10, 16, or 17°C, if you run the product on the Auto, Operations modes other than the temperature setting will be the Same at the last time operation was stopped, so Cooling Heating Cooling Heating type of operations cannot be automatically set. If you set the On timer and Off timer on the same time, the air con- ditioner will run the On timer. If two On timer are set at the same time, the air conditioner will run in the order of the program number. If there is a power interruption, such as due to a power outage During the Weekly timer setting or a circuit breaker cutting out, the internal timer of the air conditioner will be incorrect. ) In such a case, the main timer lamp will notify you of this by blinking, so carry out matching of the time and date. If you want to run the product on Weekly timer after using the On/ Off timer, Program timer, or Sleep timer while the Weekly timer is running, you need to activate the Weekly timer again. Press the "NEXT" button to go back to step 4 and configure the next setting. 6 Press the "SELECT" button to set the desired On time or Off time. Press the "NEXT" button to go back to step 4 and configure the next setting. If you want to move on to the next setting, press the "NEXT" button, return to step 4 and configure the next setting. If you want to cancel the setting midway, please press the "TIMER SETTING" button instead of pressing the "SEND" button. NOTES: When canceling the Weekly timer, select the No timer operation in Step 5 in the Weekly timer setting. If you want to go back to the previous step when configuring set- tings , press the "BACK" button. [. . . ] In the following events, immediately stop operation of the air conditioner, and disconnect all the power supply by turning off the electrical breaker or disconnecting the power plug. As long as the unit is connected to the power supply, it is not insulated from the power supply even if the unit is turned off. Unit smells of something burning or emits smoke · Following symptoms do not indicate product malfunction, but they are normal functions or characteristics of this product. To prevent blowout of the fuse, the compressor will not operate while the protection circuit is working for about 3 minutes after sudden OffOn operation of the power supply. [. . . ]