User manual FUJITSU 690TX

[. . . ] COPYRIGHT Fujitsu PC Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. Fujitsu and the Fujitsu logo are registered trademarks, and LifeBook is a trademark of Fujitsu Limited. Built for Humans and ErgoTrac are trademarks of Fujitsu PC Corporation. [. . . ] Default [Available] [Available] [Available] [Available] [Available] [Available] [Available] Description Turns on or off the reservation for that IRQ for legacy ISA devices. Turns on or off the reservation for that IRQ for legacy ISA devices. 87 Section Three DMI Event Logging Submenu of the Advanced Menu The DMI Event Logging Submenu is for setting up the logs DMI event logging. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See page 57. ) Table 3-11 shows the names of the menu fields for the DMI Event Logging submenu, all the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. Figure 3-11 DMI Event Logging Submenu 88 LifeB ook 60 0 Series from Fuj itsu C onfi gu ri n g Your Li fe Book 600 S er ie s Table 3-11 Fields, options and Defaults for the DMI Event Logging Submenu Menu Field Event log capacity: Event log validity: Clear all DMI event logs: Options Display only. Default [Space Available] [Valid] [No] A Yes selection causes the event logs to clear at the next boot. Once the logs are cleared this automatically sets to No until reset to yes by selecting yes here. Description Event Logging: System Boot Event: Enabled; Disabled. Enabled; Disabled. [Enabled] [Disabled] 89 Section Three ACPI Features Submenu of the Advanced Menu The ACPI Features Submenu is for setting up Advanced Configuration and Power Interface parameters in Windows. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See page 57. ) Table 3-12 shows the names of the menu fields for the ACPI Features submenu, all the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. POINT ACPI features will only be fully available in Windows 98. Figure 3-12 ACPI Features Submenu 90 LifeB ook 60 0 Series from Fuj itsu C onfi gu ri n g Your Li fe Book 600 S er ie s Table 3-12 Fields, options and Defaults for the ACPI Features Submenu Menu Field Enable ACPI: Battery Management: Options Yes; No. Default [Yes] [Standard Driver] Description Turns on and off the Advanced Configuration and Power Interface. Selects battery management interface. Exiting from the Advanced Menu When you have finished setting the parame ters on the Advanced Menu, you can either exit from setup utility or move to another menu. If you wish to exit from setup utility, press the Esc key to go to the Exit menu. If you wish to move to another menu, use the cursor keys. 91 Section Three SECURITY MENU ­ SETTING THE SECURITY FEATURES The Security menu allows you to set up the data security features of your notebook to fit your operating needs and to view the current data security configuration. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See page 57. ) Table 3-13 shows the names of the menu fields for the Security menu, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. The default condition is no passwords required and no write protection. Figure 3-13 Security Menu 92 LifeB ook 60 0 Series from Fuj itsu C onfi gu ri n g Your Li fe Book 600 S er ie s POINT If you set a password, write it down and keep it in a safe place. If you forget the password you will have to contact your support representative to regain access to your secured functions and data. POINT If you make an error when re-entering the password a [Warning] will be displayed on the screen. Press the Esc key to abort the password setting process. CAUTION Entering a password incorrectly 3 times in a row will cause the keyboard and mouse to be locked out and the warning [System Disabled]to be displayed. If this happens restart the computer by turning off and on the power with the power switch and use the correct password on reboot. CAUTION If the Power Management Security is Enabled and the Password on Boot is Disabled you will not be able to resume operation from the Suspend or Save-toDisk modes. 93 LifeBo ok 600 Series from Fuji tsu Section Three Co nfi gu ri ng Your L ife Book 600 S er ie s Table 3-13 Fields, Options and Defaults for the Security Menu Menu Field Supervisor Password is: User Password is: Set Supervisor Password: Options -- -- [Enter] Default Clear Clear -- Description A display-only field. [. . . ] 9, 26, 41, 43, 46-47, 59, 61, 66, 95, 115-116, 137, 152, 159-160 Internal battery . 3-6, 8, 12-13, 21, 23, 26-28, 32, 34-36, 42, 49, 52, 69-70, 77-78, 93, 117-118, 120, 122, 128-129, 135-136, 139, 143-144, 149, 154, 157, 169-170, 172-173, 178, 180 Kilobyte . 1-3, 10-15, 26, 30-31, 37-40, 54, 105, 117-122, 125, 127-130, 135, 142, 150, 167-171, 176 Hardware data security . 3, 12-13, 51, 80-81, 117-118, 120, 122, 128, 135-136, 169-170, 172, 177 MMX technology. [. . . ]