User manual FUJITSU SIEMENS SCENIC T (I845)

[. . . ] PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. All rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. [. . . ] All Rights Reserved STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP PNP / PCI CONFIGURATION LOAD BIOS DEFAULTS LOAD SETUP DEFAULTS ESC: Quit !"#$ F7: Load Setup Defaults : Select Item INTEGRATED PERIPHERALS HARDWARE MONITOR & MISC SETUP SUPERVISOR PASSWORD USER PASSWORD IDE HDD AUTO DETECTION SAVE & EXIT SETUP EXIT WITHOUT SAVING F5: Old Values Time, Date , Hard Disk Type F6: Load BIOS Defaults F10:Save & Exit Power Management Setup This setup page includes all the adjustable items of Green function features. PNP/PCI Configuration This setup page includes all the adjustable configurations of PCI & PnP ISA resources. Load Fail-Safe Defaults Load Fail-Safe Defaults option loads preset system parameter values to set the system in its most stable configurations. 18 - English A26361-D1596-Z121-1-7619 BIOS Setup Load Optimized Defaults Load Optimized Defaults option loads preset system parameter values to set the system in its highest performance configurations. Integrated Peripherals This setup page includes all onboard peripherals. Hardware Monitor & MISC Setup This setup page is auto detect fan and temperature status. Supervisor Password Set Change or disable password. It allows you to limit access to the system and/or BIOS setup. User Password Set Change or disable password. It allows you to limit access to the system. IDE HDD Auto Detection Automatically configure hard disk parameters. Save & Exit Setup Save CMOS value settings to CMOS and exit setup. Exit Without Saving Abandon all CMOS value changes and exit setup. A26361-D1596-Z121-1-7619 English - 19 BIOS Setup Standard CMOS Features AMIBIOS SETUP - STANDARD CMOS SETUP ( C ) 2001 American Megatrends, Inc. All Rights Reserved System Date : Jul 01 2002 Mon System Time : 16:10:49 TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE Pri Master : Pri Slave : Sec Master : Sec Slave : Auto Auto Auto Auto Floppy Drive A : 1. 44 MB 31/2 Floppy Drive B : Not Installed Virus Protection : Disabled Date is standard format Month: Jan - Dec Day: 01- 31 Year: 1990 - 2099 Base Memory: Other Memory: Extended Memory: Total Memory: 640 Kb 384 Kb 127 Mb 128 Mb ESC : Exit !" : Select Item PU / PD / + / - : Modify (Shift) F2 : Color Date The date format is <week>, <month>, <day>, <year>. Week Month Day Year The week, from Sun to Sat, determined by the BIOS and is display only The month, Jan. The day, from 1 to 31 (or the maximum allowed in the month) The year, from 1990 through 2099 Time The times format in <hour> <minute> <second>. is 13:00:00. 20 - English A26361-D1596-Z121-1-7619 BIOS Setup Primary Master, Slave / Secondary Master, Slave The category identifies the types of hard disk from drive C to F that has been installed in the computer. Manual: type is user-definable; Auto: will automatically detect HDD type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. If you select User Type, related information will be asked to enter to the following items. Ê Enter the information directly from the keyboard and press <Enter>. Such information should be provided in the documentation form your hard disk vendor or the system manufacturer. (Default value) Password Check Please refer to the detail on Password Check. Setup Always The user must enter correct password in order to access BIOS setup utility (Default Value) The user must enter correct password in order to access the system and/or BIOS Setup. S. M. A. R. T. Capability. APIC Interrupt Mode APIC PIC Through IOAPIC generate more IRQ for system use. (Default Value) Use AT standard IRQ controllers to generate IRQ. When you already have IOAPIC enable system and want to upgrade the system please note, since running an IOAPIC enabled OS (like Windows NT, Windows 2000, Windows XP. . . ) system with none IOAPIC HW support will cause the system to hang. Following are some situations users might run into: 1. An IOAPIC enabled OS and change the BIOS setting from IOAPIC to PIC, this will cause your system to hang. 24 - English A26361-D1596-Z121-1-7619 BIOS Setup Chipset Features Setup We would not suggest you change the chipset default setting unless you really need it. AMIBIOS SETUP - CHIPSET FEATURES SETUP ( C ) 2001 American Megatrends, Inc. All Rights Reserved Configure SDRAM by SPD SDRAM Frequency SDRAM CAS# Latency SDRAM Command Rate AGP Mode AGP Comp. Driving AGP Fast Write AGP Aperture Size AGP Read Synchronization PCI Delay Transaction USB Controller USB 1. 1 Legacy Support USB 1. 1 64/60 Emulation : Enabled : Auto : 2. 5 : 2T Command : 4X : Auto : DA : Disabled : 64MB : Disabled : Disabled : 6 USB Ports : Disabled : Disabled ESC: Quit F1: F5: F6: Help Old Values Fail-Safe !"#$: (Shift)F2: F7 : Select Item Color Optimized PU/PD/+/- : Modify Configure SDRAM by SPD Disabled Enabled Disable Configure SDRAM by SPD. (Default Value) SDRAM Frequency 200MHz 266MHz Auto Set SDRAM Frequency to 200MHz. (Default Value) A26361-D1596-Z121-1-7619 English - 25 BIOS Setup SDRAM CAS# Latency This item will be available when "Configure SDRAM by SPD" set to Disabled. (Default Value) For Fastest SDRAM DIMM module. SDRAM Command Rate 2T 1T Command Set SDRAM Command Rate to 2T Command. [. . . ] CPU Fan Speed System Fan Speed Vcore Vtt +3. 300V +5. 000V 5VSB : +1. 760V : +1. 264V : +3. 280V : +4. 999V ESC: Quit F1: F5: F6: Help Old Values Fail-Safe !"#$: PU/PD/+/- : (Shift)F2: F7: Select Item Modify Color Optimized : +4. 999V : 33°C / 91°F : 7031 RPM : 0 RPM : No +12. 000V : +12. 352V Reset Case Open Status Case Status If the case is closed, "Case Status" will show "Closed". If the case has been opened, "Case Status" will show "Open". If you want to reset "Case Status" value, set "Reset Case Open Status" to "Yes" and save CMOS, your computer will restart. CPU / System Temp. Detect CPU / System Temperature automatically. CPU / System Fan Speed Detect CPU / System Fan speed status automatically. Current Voltage (V) Vcore / Vtt / +3. 3V / +5V / +12V / 5VSB Detect system's voltage status automatically. 38 - English A26361-D1596-Z121-1-7619 BIOS Setup Set Supervisor / User Password When you select this function, the following message will appear at the center of the screen to assist you in creating a password. AMIBIOS SIMPLE SETUP UTILITY - VERSION 2. 00 ( C ) 2001 American Megatrends, Inc. [. . . ]