User manual FUJITSU SIEMENS SCENIC S2 (I815E)

[. . . ] BIOS update) on our mainboards can be found on the Internet under: http://www. fujitsu-siemens. com/mainboards Dieses Handbuch wurde auf Recycling-Papier gedruckt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr. /Order No. : A26361-D1387-Z180-1-7619 Printed in the Federal Republic of Germany AG 0203 02/03 A26361-D1387-Z180-1-7619 Mainboard D1386 / D1387 Additional Technical Manual February 2003 edition Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA. [. . . ] Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation. PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc. Magic Packet is a registered trademark of Advanced Micro Devices, Inc. Rambus, RDRAM, and the Rambus Logo are registered trademarks of Rambus Inc. Direct Rambus, RIMM, SO-RIMM, and Direct RDRAM are trademarks of Rambus Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright ã Fujitsu Siemens Computers GmbH 2003 All rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved. Speaker Support LAN / with Alert-on-LAN HI-SPEED USB SmartCard Support (USB / serial) Thermal Management System Monitoring Fujitsu Siemens Keyboard Power Button Support Internal Connectors DIMM Sockets (DDR, PC2100) AGP Slot (4x, 32Bit, 66 MHz, 1. 5 V) PCI Slots (32Bit, 33 MHz, 5 V and 3. 3 V) CNR Slot IDE Interfaces (Ultra DMA/100) Floppy Interface (up to 2. 88 MB) S/PDIF* (digital Audio) CD / AUX Audio Input Frontpanel Audio (headphone, microphone) Wake-on-LAN Connector USB Ports* (2. 0, ~480Mb/s) Serial Ports* (FIFO, 16550 compatible) FAN Connectors PSU** / FAN1 / FAN2/ FAN3 SMBus Connector* (Case Temperature) Intrusion Connector* (Case Open) Power Connectors ATX / ATX12V / AGP PRO 2 1 6 2 1 1 1/1 4 1 -/1/1/1 1/1/2 1 6 2 1 1 1/1 4 1 1/1/1/1 1 1/1/Intel 845G ATX ü ü ü/ü/ü ü/ü Intel 845G ATX ü ü -/ü ü/ü ü ü/ü ü ü D1387-A 2 - English A26361-D1387-Z180-2-7619 Features External Connectors VGA Audio Mic. in / Line in / Line out (2 x 0. 5 W / 8 ) Game/MIDI LAN (RJ-45) PS/2 Mouse/Keyboard USB Ports (2. 0, ~480Mb/s) Serial Ports (FIFO, 16550 compatible) Parallel Port (EPP/ECP) * for use with internal devices or optional Front- or Rearpanel ** not supported by standard Power Supplies 1 1/1/1 1 1/1 2 1 1 1 1/1/1 1 1/1 2 1 1 A26361-D1387-Z180-2-7619 English - 3 Mechanics Mechanics Layout Mainboard D1386 / D1387 ATX 12" x 9. 6'' (304. 8 mm x 243. 84 mm) 13 4 5 6 8a 8b 8c 2 7 1= 2= 3= 4= 5= PS/2 mouse port PS/2 keyboard port Serial port Parallel port VGA 6 = LAN connector 7 = USB port 8a = Audio Line-In 8b = Audio Head-Out 8c = Audio Micro-In The components and connectors marked are not necessarily present on the mainboard. 4 - English A26361-D1387-Z180-2-7619 Mechanics 1 234 5 6 7 8 9 10 11 12 13 14 15 DIMM 2 DIMM 1 20 AGP PCI 2 PCI 3 PCI 1 PCI 4 PCI 5 19 1= 2= 3= 4= 5= 6= 7= 8= 9= Power supply Floppy Disk Drive IDE drives 3 and 4 (secondary) Power supply control Frontpanel connector IDE drives 1 and 2 (primary) Power On LED II COM 2 SMB 1 / SMB 2 10 = 11 = 12 = 13 = 14 = 15 = 16 = 17 = 18 = 19 = 20 = 18 17 16 Fan 2 Fan 3 LCD Display USB ports C / D USB ports E / F Intrusion SP/DIF (digital Audio) Audio Frontpanel headphone, microphone) CD Audio Input Additional Power Supply Fan 1 (e. g. for the processor) The components and connectors marked are not necessarily present on the mainboard. PCI 6 A26361-D1387-Z180-2-7619 English - 5 Connectors Connectors ! Some of the following connectors are optional! Power supply ATX connector 1 11 Pin 1 2 3 4 5 6 7 8 9 10 Signal +3. 3V(P2V2P) +3. 3V(P2V2P) GND +5V (VCC) GND +5V (VCC) GND Powergood (high asserted) +5V Auxiliary (VCC Aux) +12V (P12VP) Pin 11 12 13 14 15 16 17 18 19 20 Signal +3. 3V(P2V2P) -12V (P12VN) GND PS on (low asserted) GND GND GND -5V (5PVN) +5V (VCC) +5V (VCC) 1 Power supply control Pin 1 2 3 4 5 6 7 8 Signal AC Outlet (high asserted) PS FAN Control (PS FAN C max 3mA) Reserved PS FAN Sense SMB CLK SMB DATA VCC EEPROM (+3, 3V) GND 6 - English A26361-D1387-Z180-2-7619 Connectors Front panel connector Power On/Off Reset 1) Sleep LED Message LED Power On 1) HD-LED LED I 1) 3) 1 2 1) 1) 2) Sleep SCSI LED Input Speaker 1) Cable is not included in the delivery scope. 2) The same interface 3) 2pin or 3pin connector possible The sleep button (optional) functions only for operating systems with APM (not with ACPI). Pin 1 Signal Sleep LED (Cathode) Pin 2 Signal In case of 'Sound via internal system speaker' support: Speaker negative Otherwise: not connected Key GND In case of 'Sound via internal system speaker' support: Speaker positive Otherwise: not connected Key pin Key pin Key Not connected SCSI LED input (low asserted) SCSI LED input (low asserted) Not connected Key GND GND GND 3 5 7 Sleep LED (Anode) Key PowerON_LED (Anode) 4 6 8 9 11 13 15 17 19 21 23 25 271) 29 PowerON_LED (Anode) Sleep LED and PowerON_LED (Cathode) Message LED (Anode) Message LED (Cathode) Key HD_LED (Anode) HD_LED (Cathode) GND Power button (low asserted) Sleep button (low asserted) Reset button (low asserted) 10 12 14 16 18 20 22 24 26 28 30 A26361-D1387-Z180-2-7619 English - 7 Connectors LED connector II 3 1 Pin 1 2 3 Signal Power On LED II (Anode) Power On LED II (Anode) Power On LED II (Cathode) SMB connector 1 Pin 1 2 3 4 Signal P3V3P_DUAL SMB_CLK_DUAL_H SMB_DATA_DUAL_H GND BMC SMB connector 1 Pin 1 2 3 4 Signal P3V3P_DUAL SMB_PIC_CLK_H SMB_PIC_DATA_H GND Fan 1 connector (system fan - supervised: D1387) Pin 1 2 3 Signal GND D1387: Controlled Fan voltage (0V, +6V . . . 1 A) Fan sense 1 8 - English A26361-D1387-Z180-2-7619 Connectors Fan 2 connector (system fan - supervised: D1387)) Pin 1 2 3 Signal GND D1387: Controlled Fan voltage (0V, +6V . . . [. . . ] 1 A) Fan sense 1 8 - English A26361-D1387-Z180-2-7619 Connectors Fan 2 connector (system fan - supervised: D1387)) Pin 1 2 3 Signal GND D1387: Controlled Fan voltage (0V, +6V . . . 1 A) Fan sense 1 Fan 3 connector (system fan) Pin 1 2 3 Signal GND Fix Fan voltage (+12 V, max. [. . . ]