User manual FUJITSU SIEMENS SCENIC PT/PS/PD 3XX/4XX

[. . . ] BIOS update) on our mainboards can be found on the Internet under: http://www. fujitsu-siemens. com/mainboards Dieses Handbuch wurde auf Recycling-Papier gedruckt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr. /Order No. : A26361-D1522-Z120-1-6319 Printed in the Federal Republic of Germany AG 0103 01/03 A26361-D1522-Z120-1-6319 Deutsch English Mainboard D1522 / D1521 Français Technisches Handbuch Technical Manual Ausgabe Januar 2003 January 2003 edition Intel, Pentium und Celeron sind eingetragene Warenzeichen der Intel Corporation, USA. Microsoft, MS, MS-DOS und Windows sind eingetragene Warenzeichen der Microsoft Corporation. PS/2 und OS/2 Warp sind eingetragene Warenzeichen von International Business Machines, Inc. [. . . ] If a heat conducting pad (rubber-like foil) is already applied to the heat sink, then use it. If you remove the heat sink, you must clean it and apply new heat conducting paste before you remount it. Please note that, depending on the heat sink used, different heat sink mounts are required on the mainboard. i If a counter-plate is mounted on the underside of the mainboard for reinforcement, no heat sinks of the type "Intel Boxed" may be used. When using an "Intel Boxed" heat sink, the mainboard must be converted. This conversion set is either included with the mainboard or is available separately. If no counter-plate is mounted, you can use both "Intel Boxed" heat sinks and standard heat sinks. If you use the "Intel Boxed" heat sink, the mainboard will bend due to the high pressure of the retaining clips. This behaviour is specified by Intel. Ê Depending on the configuration variant, you must pull a protective foil off the heat sink or coat the heat sink with heat conducting paste before fitting it. Depending on the processor variant, clips may also be supplied for mounting the heat sink that fix it in place. When you have mounted the optional fan, connect the fan plug to the corresponding connection on the mainboard. Ê Ê A26361-D1522-Z120-3-6319 English - 17 Add-on modules / Upgrading Upgrading main memory Technical data Technology: Total size: Granularity: DDR 266 or DDR 333 unbuffered DIMM modules 184-pin; 2. 5 V; 64 Bit, no ECC 128 Mbytes up to 2 Gbyte DDR-SDRAM 32, 64, 128, 256, 512 or 1024 Mbyte for one socket A current list of the memory modules recommended for this mainboard is available on the Internet at: www. fujitsu-siemens. de/mainboards. Memory modules with different memory capacities can be combined. ! You may only use unbuffered 2, 5 V memory modules. The BIOS updates are available on the Internet at www. fujitsu-siemens. de/mainboards. BIOS update under DOS with bootable BIOS update floppy disk - brief description Ê Ê Ê Ê Ê Ê Download the update file from out website to your PC. Follow the instructions on screen. i Detailed information on the BIOS update under DOS is provided in the manual on "BIOS Setup" ("Drivers & Utilities" CD). 2. BIOS update under Windows with DeskFlash utility A BIOS update can also be carried out directly under Windows with the DeskFlash utility. DeskFlash is located on the "Drivers & Utilities" CD (from CD version 2001. 05 with DeskViewOEM V5. 0). In the "Readme" file in the subfolder DeskFlash you will find the installation instructions for DeskFlash. Further information on DeskFlash is provided in the file "DeskView. PDF" and in the DeskViewOEM online help. 22 - English A26361-D1522-Z120-3-6319 Add-on modules / Upgrading BIOS Recovery - Recovering System BIOS i Ê Ê Ê Ê Ê All BIOS settings are reset to the default values. Open the casing as described in the operating manual. Set the switch for "Restore system BIOS" to ON or plug the corresponding jumper (see "Settings with switches and jumpers" chapter). You have successfully restored the BIOS if you hear the signal sequence "short-short- long- long- long" and the diskette access indicator is dark. Set the switch for "Restore system BIOS" to OFF or remove the corresponding jumper (see "Settings with switches and jumpers" chapter. Select the menu item Reset Configuration in the menu Advanced and change the setting to Yes. [. . . ] Service Processor not properly installed The server management controller has not been correctly installed. If the message is still displayed, please contact your sales outlet or customer service centre. Storage Extension Group = xy Configuration error, x Storage Extensions(s) found, configured are y SE(s). The specified number of storage expansion units (SEs) in the BIOS Setup menu Server - Storage Extensions - Number of connected SE is incorrect. [. . . ]