User manual FUJITSU SIEMENS OPENSM2 9.0 LINUX DATASHEET

[. . . ] Each component consists of a manager with a comfortable graphical user interface on a Windows PC and agents which collect performance data of the systems to be monitored resp. The managers can work together with the agents of all members of the openSM2 product line. Online monitoring With INSPECTOR a number of systems can be monitored simultaneously. [. . . ] Snapshot reports show the current system status in graphic or numeric form. Time-series reports enable the user to read off the chronological development of the measured values over the last hours. There are global reports, which provide an overview of multiple systems in a chart or a table, and reports which show selected performance data of an individual system. The user can specify the measurement variables and monitored objects whose measured values are to be presented in a report, and can also define new measurement variables by linking variables by means of formulas. The user can customize the charts in the reports by selecting different chart types (bar, line, line logarithmized, etc. ) and colors. The charts can be printed by mouse click, saved as a graphics file or copied to the Clipboard for transfer to mainstream programs (Word, PowerPoint, etc. ). A header and footer can be inserted for printout and the labeling of the charts modified. The monitored data provided by the systems can be supervised by means of user-defined rules. If all conditions of a rule are fulfilled an alarm for the rule is set off. The system entry in the system list takes the color of the alarm level assigned to the rule and the actions defined for the rule are executed. The following actions can be triggered: A report with the measurement variable in question is opened automatically for each condition of the rule. A rule can be used to link not only conditions for the measurement variables of one system, but also conditions for different systems. In the rules the user can define different limit values and actions for different times of day in order to take account of different system usage types ­ for instance, online mode during the day and batch mode during the night. With the help of an SNMP subagent for openSM2 (Linux) the data for some selected measurement variables can be requested from a management station and SNMP traps can be sent to a management station in case of alarm conditions. ANALYZER With ANALYZER, multiple monitoring files ­ from the same or different systems ­ can be analyzed simultaneously in a single analysis run. The user specifies the type and scope of the analysis via the user-friendly graphical interface of the manager. The analysis job thus defined is processed by agents and the result is then presented by the manager. [. . . ] Ordering and delivery This software product can be obtained from your local Fujitsu Technology Solutions GmbH regional office. Information about environmental care, policies, programs and our Environmental Guideline FSC03230: ts. fujitsu. com/aboutus Take back and Recycling information: ts. fujitsu. com/recycling All rights reserved, including intellectual property rights. Technical data subject to modifications and delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded. [. . . ]