User manual FUJITSU SIEMENS ESPRIMO P5730

[. . . ] Components Description English BIOS Handbook D28xx Are there . . . . . . are available on our website: "www. fujitsu-siemens. com/support" This manual was produced by Xerox Global Services Published by Fujitsu Siemens Computers GmbH AG 08/08 Edition 1 Order no. A26361-D2800-Z120-1-19 *A26361-D2800-Z120-1-19* BIOS Handbook D28xx Description Introduction Navigating BIOS Setup Main Menu ­ System functions Advanced Menu ­ Advanced system configuration Security Menu - Security features Power Menu ­ Energy saving functions Boot Menu ­ System boot Exit Menu ­ Exit BIOS Setup Index 1 3 6 13 35 56 59 60 61 Intel and Pentium are registered trademarks and MMX and OverDrive are trademarks of Intel Corporation, USA. Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation. [. . . ] No Default setting 26 A26361-D2800-Z120-1-19, edition 1 Advanced Menu ­ Advanced system configuration LCD Configuration Provides the option of adjusting the display of system information on the status display. LCD Configuration Time: Date: Bios Version: LAN MAC Adress: Product Name: Board Serial Number: Custom Serial Number: Custom String: Manufacturer: [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] Item Specific Help Allows to show the item on the LCD. LCD Time Allows the current system time to be displayed on the status display. The current time is displayed. LCD Date Allows the current system date to be displayed on the status display. The current system date is displayed. LCD BIOS Version Allows the current BIOS version to be displayed on the status display. The current BIOS version is displayed. LCD LAN MAC Address Allows the current system date to be displayed on the status display. The current system date is displayed. A26361-D2800-Z120-1-19, edition 1 27 Advanced Menu ­ Advanced system configuration LCD Product Name Allows the product name to be displayed on the status display. The product name is displayed. LCD Board Serial Number Allows the board serial number to be displayed on the status display. The board serial number is displayed. LCD Custom Serial Number Allows the customer-specific serial number to be displayed on the status display. Disabled Enabled The customer-specific serial number is not displayed. The customer-specific serial number is displayed. LCD Custom String Allows a customer-specific text to be displayed on the status display. The customer-specific text is displayed. LCD Manufacturer Allows the manufacturer to be displayed on the status display. The manufacturer is displayed. 28 A26361-D2800-Z120-1-19, edition 1 Advanced Menu ­ Advanced system configuration System Management System Management Battery State: SM Fan Control: Fan State: Fan 1: Fan 2: Fan 3: Fan 4: Power Supply: Thermal Sensor State: CPU: SIO: Remote Diode: Northbridge: OK OK OK [None] OK [Auto] [None] OK [None] [None] OK Item Specific Help [Enhanced Cooling] Increased air flow and maximum CPU performance. [Silent] Minimum fan noise, may reduce CPU performance. Battery State Indicates whether the voltage of the CMOS battery is sufficient. The CMOS battery should be replaced. SM Fan Control Controls the speed of the fan. Depending on the system configuration and applications used, you can change the preset mode. If the system is fully configured with all available expansions/upgrades then silent mode is not recommended. Enhanced Cooling Auto Silent The fan speed is automatically increased to a higher range. The processor speed is initially temperature-controlled, before the fan speed is automatically adapted. This enables the system to run more quietly. A26361-D2800-Z120-1-19, edition 1 29 Advanced Menu ­ Advanced system configuration Fan State Indicates whether the fans for the processor (CPU), the power supply and the possible additional fans (system, auxiliary) are rotating or not. If Fail is displayed then the BIOS has detected a faulty fan or the fan has been removed. "None" is displayed if the fan does not support the function, even if the fan is running. Power Supply Fan 1 Fan 2 Possible display: None / OK / Fail Possible display: None / OK / Fail Possible display: None / OK / Fail Thermal sensor state If OK is displayed then the temperature sensor supports the function and is running. If None is displayed then the temperature sensor is not recognised by the BIOS. If Fail is displayed, the BIOS has detected a faulty temperature sensor or the temperature sensor has been removed. [. . . ] The system is switched on monthly. Power Failure Recovery ­ System status after a power failure Power failure, system reaction Specifies the system behaviour after a restart caused by a power failure. Always Off Always On Previous State Disabled The system switches on briefly, performs a status check (initialisation), and then switches off. The system switches on briefly, performs a status check, and then returns the mode it was in before the power failure occurred (ON or OFF). The system does not switch on. All wake up sources are reconfigured during the short initialisation process. [. . . ]