User manual FUJITSU SIEMENS AMILO LI GETTING STARTED

[. . . ] An overview with further information about your notebook can be found . Failure to observe this warning may endanger your health, cause the equipment to malfunction or lead to loss of data. The warranty does not cover defects of the equipment caused by failure to follow these instructions. Indicates a result flags data entered using the keyboard in a program dialog or command line, e. [. . . ] Keep other objects 100 mm away from the notebook and its mains adapter to ensure adequate ventilation. please refer to the instructions in "Safety information" , Page 3. The power cable supplied conforms to the requirements of the country in which you purchased your notebook. Make sure that the power cable is approved for use in the country in which you intend to use it. The mains adapter's power cable must only be connected to a mains socket if the notebook is connected to the mains adapter. Make sure that the rated current of the mains adapter is not higher than that of the power system to which you connect it (see technical data for the mains adapter). connect the mains adapter cable (1) to the DC jack (DC IN) on the notebook. When you switch your notebook on for the first time, the supplied software is installed and configured. Due to the fact that this installation procedure must not be interrupted, you should set aside enough time for it to be fully completed and connect the notebook to the mains outlet using the mains adapter. During installation, the notebook must only be rebooted when you are requested to do so!Your operating system is pre-installed on the hard disk to facilitate the procedure when you use your notebook for the first time. switch the notebook on (see "Switching on the Notebook" , Page 7). Consult the operating system manual if anything is unclear about the requested input data. If a Windows operating system is installed on your notebook, you will find additional information on the system as well as the drivers, help programs, updates, manuals, etc. On your notebook or on the "Drivers & Utilities" CD/DVD or on our website (see "Information sources", Page 2). From the Windows Start menu, by clicking on Start ­ Shut Down ­ Shut down ­ OK). If the notebook is not switched off automatically, press the ON/OFF switch (1) for approx. You must first charge the battery with the mains adapter connected to the power socket (see "Connecting the power adapter", Page 6). The battery supplies your notebook with the necessary power during mobile use. Information on how to install and remove the battery, how to maintain and service it, and how to optimise the battery operating time can be found in the "EasyGuide" manual. [. . . ] Depending on the particular configuration you have purchased, it is possible that functionality may be slightly reduced compared to a desktop PC if you are running processor-intensive gaming software, e. Updating your hardware with drivers which have not been approved by Fujitsu Siemens Computers may result in performance losses, data losses or malfunction of the equipment. If data is lost, you can restore your applications using the data carriers. However, if you do not have backup copies of your own data files, it is no longer possible to restore them. [. . . ]