User manual FUJITSU SIEMENS AMILO

[. . . ] Com/support All rights reserved, including rights created by patent grant or registration of a utility model. All designations used in this document may be trademarks, the use of which by third parties for their own purposes could violate the rights of their owners. The information in this manual is subject to change without prior notification. Despite every care being taken in its production, we cannot rule out the possibility that this manual may contain errors or omissions. [. . . ] under "Select a language" and "Select a keyboard layout:" specify the language and keyboard layout. As a rule, the language will be automatically recognised by the system and is marked in grey. Under "User name:" enter the user names and the "Password". The user name will also be available in the selection menu and can be called up by clicking on the black triangle. If you have not assigned a password for the user selected, leave the "Password" field empty. In the following "System Recovery Options" menu, select the option "Fujitsu Siemens Computers Recovery" with the sub-item "Easy backup and recovery of your system". This will give you access to the DVD burner, click on "Next". select a storage medium under "Select type of disk" , click on "Next". This labelling is necessary to ensure that the media do not become mixed up during the restore process. Insert the first disk in the drive of your burner and close the drive. The duration of the process is dependent on the configuration of your system and may therefore take several minutes. Your personal data could be lost during restoration of the factory default settings. The operating system is restored on the system partition on which the factory default settings were installed. Data on other partitions or hard disks is unaffected by this restore processes. Should your system be attacked by 'uninvited guests' from the Net, such as viruses, reformat all hard disks and restore your system with the system restore disks provided with the computer or which you have created. Caution If you would like to set up a RAID system on your PC or notebook, you must create your system restore disks before you do so. If you need to use these disks, it may first be necessary to terminate the RAID connection. Please also note that, in the case of RAID systems already installed, it is possible that restoring the hard disk as described below may not function. Personal data could be lost during restoration of the factory default settings. Turn your machine on or: If the PC is already running, switch the machine off, wait for a moment and then switch it on again. [. . . ] If it does not, click on the CD with the right mouse button and select "Open". A page will now appear in which you have the facility both manually to install drivers, software and hot fixes, and also to use DeskUpdate for an automatic installation. Confirm the message "an unidentified program is attempting to access your computer" from the User Account Control with "Allow Access". A search will now be made for drivers, software and hot fixes for your system. [. . . ]