User manual FREESTYLE ROCKAWAY

[. . . ] NOTE: In FOREIGN TIME settings, only minutes, hours, date, month and day are open to setting. alarm. Press S2 button to alter the timer setting among 1, 3, 5, 10, 15, 20, 25, 30, 45 and 60 minutes. FOLLOW THESE 8 TIPS TO GET THE MOST OUT OF YOUR NEW WATCH! TO USE THE TIMER WHEN AN ALARM OR HOURLY CHIME GOES OFF A tune will go off by the hour if the hourly chime function is activated. An alarm tune will be emitted for around 20 seconds at the designated time when the alarm is activated. To reload the TIMER, press S1 button to stop counting and then press S2 button. To stop the tune, press any button, the TIMER will reload automatically. [. . . ] NOTE: You can leave the timer running while switching over to other operating modes. 1. Make sure your crown is returned to the original position before you expose your watch to water. If your watch is exposed to saltwater it is very important to wash it thoroughly under tap water and wipe dry with a soft cloth. Severe impacts or drops may affect your watches water resistance and performance. Avoid exposing your Freestyle watch to extreme temperatures such as in a hot shower, Jacuzzi, sauna or hot tub. The combination of extreme heat and water may cause your watch to lose some of its water resistance. Avoid exposing your watch to chemicals, soaps or solvents as they deteriorate the water resist seals in your watch. Never try to remove the caseback, leave this to a certified watch repair technician or Freestyle service center. This will help in preventing water leakage from improper battery replacement. While the stopwatch is running, press S2 button once to register a lap. To reset to zero, press S1 button to stop counting, then press S2 button to reset the counter to zero. NOTE: You can leave the stopwatch running while switching over to other operating modes. TO USE THE BACKLIGHT Press S4 button to turn on the backlight for around three seconds. WATER RESISTANCE GUIDE 20 ATM / 200 METERS / 660 FEET / 200 METERS H2O 10 ATM / 100 METERS / 330 FEET / 100 METERS H2O 5 ATM / 50 METERS / 165 FEET / 50 METERS H2O 3 ATM / 50 METERS / 100 FEET / 30 METERS H2O WATER RESISTANCE DISPLAY MODES The watch has four display modes: HOME TIME (TIME), HOME TIME ALARM (ALM1), STOPWATCH (STW) and COUNTDOWN TIMER (TMR). The mode description will appear for 2 seconds before the selected mode is activated. TO SET THE ALARM TIME HOME AND FOREIGN DISPLAY To display FOREIGN TIME, press S2 button when HOME TIME is displayed. The mode description (TM-2) will appear shortly before FOREIGN TIME is displayed. To display the daily FOREIGN TIME ALARM, press S2 button when HOME TIME ALARM is displayed. The mode description (ALM2) will appear shortly before FOREIGN TIME ALARM is displayed. Press S2 button to toggle between HOME TIME ALARM and FOREIGN TIME ALARM mode to set. Press and hold S2 button for two seconds until the "SET" message appears and the minute digits blink. [. . . ] Press and hold S2 button for two seconds until the "SET" message appears and the minute digits blink. After finish making all the settings, press S2 button to confirm. Suitable for most water sports including deep water diving Suitable for most water sorts. E. g. : Swimming, surfing and snorkeling, but not suitable for deep water diving Suitable for light swimming. E. g. : Bathing in a pool or low tide waters, but not suitable for diving Suitable for washing hands and light splashing SUITABLE ATMOSPHERE TO TURN ON/OFF THE ALARM AND HOURLY CHIME TO SET THE TIME AND CALENDAR In alarm mode, 1. [. . . ]