User manual FREECOM MEDIAPLAYER 3.5

[. . . ] 520 Freecom MediaPlayer Drive-In GB Dear customer, Thank you for buying the Freecom Network MediaPlayer-35 drive-in kit, a brand-new digital multimedia player that supports dual data access mode via 3. 5" HDD inside (not supplied) and 10/100Mbps Network. With this player you can easily enjoy Digital Movies, Digital Music, Digital Photos from a 3. 5" HDD (when assembled in the device) and from all PC's in your network, directly on your TV or HiFi set. The products named in this manual are only used for identification purposes and may be trademarks or registered trademarks of the respective companies. If this is the case, the user has to take appropriate measures and assume all responsibility and costs for. [. . . ] For example, "My Movie": GB 2 "Share Name": maximum length is 12 characters. 3. Click 'Permissions' and check whether "Everyone" account is present or not. If not, add "Everyone" account. We Recommend only to use 'Read>Allow' at Permissions. 37 Freecom MediaPlayer Drive-In GB 2 4. After that, the shared folder will be displayed as following picture. 5. Move to [Settings>Control Panel>Administrative Tools>Computer management>Local Users and Groups>Users], and double click 'Guest'. Check 'User cannot change password' and 'Password never expires'. 38 Access PC via Network 7. Move to [Control Panel>Network and Dial-up Connections], and select Properties 'Local Area Connections' by right click of mouse. If you see two or more 'Local area connections', select one that you will use for connecting to the player. GB 2 8. Double click 'Internet Protocol (TCP/IP)' that you want to use on your computer. 39 Freecom MediaPlayer Drive-In GB 2 9. Check 'Use the following IP address', and write 'IP address' & 'Subnet mask' that you want to use. For example: IP address: Subnet mask: 192. 168. 1. 3 255. 255. 255. 0 If you have already been provided a dynamic IP address from DHCP Server or IP Router on your local area network, you don't need to enter a static IP address. Use 'Obtain an IP address automatically' or enter the IP address & Subnet mask that DHCP Server or IP Router provides. 10. Set the network configurations of the player. You have to connect the player to a TV set for this setup. See "3. 1. 1 Connect Video Cable". Press [SETUP] on remote control for moving to setup screen. For example: IP Address: Subnet mask: 192. 168. 1. 2 255. 255. 255. 0 40 Access PC via Network After entering the numbers, press [SETUP] again to save the configuration. GB 2 If you have already been provided dynamic IP address from DHCP Server or IP Router on your local area network, you don't need to enter a static IP address. Use 'DHCP on' or write IP address & Subnet mask that DHCP Server or IP Router provids. Check 'IP address obtained automatically' When you use 'DHCP On', you can see the IP address in MENU screen after selecting 'PC-Network' icon in Mode Selection screen. The MediaPlayer IP Address 2. 2. 3 Windows XP 1. Right-click the folder and click 'Sharing and Security' in pop menu. Check 'Share this folder on the network' and write 'Share name'. "Share Name": maximum length is 12 characters. 41 Freecom MediaPlayer Drive-In GB 2 3. After that, the shared folder will be displayed as following picture. 4. Move to [Settings>Control Panel>Administrative Tools>Computer management>Local Users and Groups>Users], and double click 'Guest'. [. . . ] You can find the latest firmware upgrade files at www. freecom. com/support. We recommend you to save the firmware file in a specially created folder, for instance "Firmware". After connecting the device to a TV set, move to the upgrade file and press [ENTER]. After finishing upgrade, you can check firmware version on Setup screen. [. . . ]