User manual FREECOM FLASH PLAYER 128 MB

[. . . ] 350 Users Manual Dear user! GB USA Thank you for choosing the Freecom Beatman Flash 128 FM MP3/WMA Digital Audio Player, the ultra small, skip-free solution for enjoying music everywhere you go, whatever you do. Please read the operating instructions carefully before starting to use your Freecom Beatman Flash 128 FM. The products named in this manual are only used for identification purposes and may be trademarks or registered trademarks of the respective companies. We reserve the right to upgrade our products in keeping with technological advances. [. . . ] You can select and view one of [NAME, STORAGE, SIZE, DATA] Option for viewing data in PC. You can select and view one of [BIG ICON, SMALL, ICON, LIST, REPORT] Information on Digital Audio Manager software CANCEL ALL OPERATIONS VIEW MEMORY PC ABOUT ABOUT *) Note: When "UPLOAD SELECTED FILES FROM PLAYER TO PC" is selected: 1. Voice files will be converted into . wav and stored on the PC. 20 Every day use 4. 3 Operating instructions GB USA Power on 4 1. After Power On, music will start immediately (when autoplay is activated). To turn the power off, press "4" button for more than 2 seconds when the player is in pause mode. 21 Hold On/Off GB USA 4 Hold-On Hold-Off The Hold function locks all buttons. Slide the hold switch in the direction of the arrow to activate Hold function. Slide the hold switch back to de-activate Hold function. Volume Control Press Vol. Volume range is 0 (minimum) to 30 (maximum). 22 Every day use Fast Backward & Fast Forward GB USA 4 Press and hold "7" button during playback to search fast backward within the song. Press and hold "8" button during playback to search fast forward within the song. Previous / Next Track 1. Press "7" button to move the previous song. 23 Loop repeat GB USA 4 1. Press "Rec/A. B" button shortly during playback to mark the beginning of the loop. Press "Rec/A. B" button shortly again to mark the end of the loop. "A B" will appear in the display and the loop is played repeatedly. EQ indicator on display will flicker; change EQ setting by pressing "7" or "8" button. Press MODE button shortly to exit EQ setting menu Navigation during playback 1. Search for music file by pressing "7" or "8" button 3. Press "4" to play the selected song Voice recording MIC 1. Press "Rec/A. B" button for more than 2 seconds to start voice recording. Note - Voice file is created automatically during voice recording - Voice quality can be changed in "MODE" settings, see page 26 28 Every day use Playback & Deleting voice files GB USA 4 1. Playback of recorded voice files is the same as playback of music files. Select a file using "7" or "8" and press "4" to start playback. Press "Rec/A. B" button for more than 2 seconds to delete the voice file that is currently playing. [. . . ] This equipment generates, uses, and can radiate radio frequency energy and if, not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by running the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. [. . . ]