User manual FREECOM AIT-SDX460

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FREECOM AIT-SDX460. We hope that this FREECOM AIT-SDX460 user guide will be useful to you.


FREECOM AIT-SDX460 : Download the complete user guide (1703 Ko)

Manual abstract: user guide FREECOM AIT-SDX460

Detailed instructions for use are in the User's Guide.

[. . . ] SDX-460V/P SDX-460V/RP 5. 25"Model Product Specification Manual Version 1. 0 Sep. NOTE: This Product Specification Manual is applicable for AIT-1 Turbo ATAPI I/F drive. Notice This document contains proprietary information which is protected by copyright. No part of this document may be photocopied, reproduced or translated to another language without prior written consent of Sony. The information contained in this document is subject to change without notice. [. . . ] ATAPI Packet Command Specification Write Delay Time: This field indicates the maximum time, in 100 millisecond increments, that the drive shall wait with a partially full buffer before forcing the data to tape. The drive defaults to a 10 second delay since the last bus activity before the data is flushed from the buffer to the tape. If Write Delay Time is set to ZERO the drive will wait indefinitely for the data group to be filled. BIS: Block Identifiers Supported is set to one to indicate that the media has recorded information about the logical block ID relative to the partition. The DBR and BIS bit are only valid on a MODE SENSE command where they are used to report drive capabilities. RSmk: The Report Set Mark bit, when set to one, indicates that Set Marks will be reported to the drive. AVC: Automatic Velocity Control function is not supported by the drive and if this bit is set a CHECK CONDITION status is returned with an ILLEGAL REQUEST sense key. SOCF: Stop on Consecutive File-marks function is not supported by the drive and if this bit is set a CHECK CONDITION status is returned with an ILLEGAL REQUEST sense key. If this bit is set a CHECK CONDITION status is returned with an ILLEGAL REQUEST sense key. REW: The Report Early-Warning End-of ­Media bit is set to ZERO indicates the drive will not report the earlywarning condition on reads but will report early-warning on writes at a distance of 2, 500 mm before the physical End-Of ­Partition. A value of ONE indicates that the drive will report the early-warning condition on writes and reads. Gap Size: This field is not used by the SDX-460V and shall be set to ZERO otherwise a CHECK CONDITION with an ILLEGAL REQUEST sense key will be returned. EOD Defined: This field shall always be set to ZERO so that the drive will use its default EOD definition to detect and generate EOD. Any other value will cause the drive to return a CHECK CONDITION status with an ILLEGAL REQUEST sense key set. EEG: The Enable EOD Generation bit shall always be set to indicate that drive will generate an EOD. The drive generates an EOD mark prior to any change of direction, if that change follows a write-type operation. This bit is only valid on the MODE SENSE command where it is used to report drive capabilities. SEW: The Synchronize at Early-Warning bit is set to ONE indicates buffered write data, File-marks and Set-marks at or after Early-Warning End-of-Media will be written to the Medium. A value of ZERO indicates that the target will retain any unwritten buffered data, File-marks, or Set-marks in the buffer when logical Early-Warning is encountered. Buffer Size at Early Warning: This field is not supported by the drive and if set, a CHECK CONDITION status is returned with an ILLEGAL REQUEST sense key set. Select Data Compression Algorithm: The SDX-460V supports the Data Compression Page and that page should be used instead of this field to control Data Compression. This field is not supported by the drive and if set a CHECK CONDITION status is returned with an ILLEGAL REQUEST sense key set. SONY AIT-1Turbo drive SDX-460V series Ver. 1. 0 7-37 7. [. . . ] SDX-460V automatically changes its mode to the same mode as with the cassette; it also automatically returns to the default (DDS) mode after ejecting the AIT mode cassette. 16. 4. Re-Using Cassettes Cassettes are re-initialized with the SCSI Mode Select Page 11h command. The Accumulative System Log in MIC is saved, even if the cassette is re-initialized. MIC cassettes may be re-initialized in either the DDS mode or the AIT mode. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE FREECOM AIT-SDX460




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FREECOM AIT-SDX460 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.