User manual FRANKE PROTRONIC BROCHURE

[. . . ] When used for WCs the fitting is combined with a solenoid flush valve. Depending on the application, the control functions provided by the intelligent electronics include the ability to adjust the sensor distance as well as a time-controlled hygiene flush. The electronis in the sensor is factory pro- grammed and must always be installed with a separate power supply unit. [. . . ] With facility for externally controlling the options such as fittings settings and communication via ECC function controller. Control functions: ­ Optional temperature sensor for measuring temperature and recording the data every 60 seconds or during thermal disinfection every 10 seconds ­ Time-controlled hygiene flushing, optionally with fixed interval or after a certain defined time after last usage Additional functions with ECC function controller (Ethernet): ­ Automatic thermal disinfection according to German DVGW requirements as well as safety switch-off ­ Cleaning system shut-down ­ Second by second time adjustment for turn-off delay approx. 250 Technical specifications Minimum flow pressure: Calculation flow rate: Volumetric flow: Operating voltage: Power consumption: Communication: Type of protection: 1. 0 bar 0. 20 l/s 0. 50 l/s at a flow pressure of 3 bar 24 V DC 7W Ethernet via ECC function controller Electronic IP 68, solenoid valve IP 40 Note: A power supply unit is essential for the function of the fitting. It must be ordered separately (see accessories) All components required for expanding the system, for example the ECC function controller, electric T-junction and the system line must be ordered separately (see accessories) to 5 PROTRONIC ­ A3000 open urinal flushing valve with combined controller and solenoid valve Text for specifications PROTRONIC ­ A3000 open opto-electronically controlled Urinal flushing valve DN 15, with combined control unit and solenoid valve for concealed mounting. Combined control unit with round opto-electronic sensor that is mounted from the rear, with polished chrome plate, with integrated control electronics, anti-twist feature, solenoid valve with bilateral flat-sealing screw connections with outer screw thread, 2 m actuator extension cable and connector line for external power supply. With facility for externally controlling the options such as fittings settings and communication via ECC function controller. Control function: ­ Time-controlled hygiene flushing, optionally with fixed interval or after a certain defined time after last usage Additional functions with ECC function controller (Ethernet): ­ Peak load program for demand-oriented fitting functions ­ Cleaning system shut-down Type AQUA 402 Article No. 7612982101243 Technical specifications approx. 250 Minimum flow pressure: Calculation flow rate: Flushing flow: Flush water volume: Operating voltage: Power consumption: Communication: Type of protection: 1. 0 ­ 4. 0 bar 0. 30 l/s 0. 3 ­ 0. 7 l/s 2 ­ 4 l adjustable 24 V DC 7W Ethernet via ECC function controller Electronic IP 68, solenoid valve IP 40 Note: A power supply unit is essential for the function of the fitting. It must be ordered separately (see accessories) All components required for expanding the system, for example the ECC function controller, electric T-junction and the system line must be ordered separately (see accessories) 6 PROTRONIC ­ A3000 open WC flushing valve with combined controller and solenoid flush valve Text for specifications PROTRONIC ­ A3000 open opto-electronically controlled DN 20 WC flushing valve, with combined controller and solenoid flush valve for concealed mounting. Combined control unit with round opto-electronic sensor that is mounted from the rear, with polished chrome plate, with integrated control electronics, anti-twist feature, solenoid-operated flush valve, 2m actuator extension cable and connector line for external power supply. With facility for externally controlling the options such as fittings settings and communication via ECC function controller. Control function: ­ Time-controlled hygiene flushing, optionally with fixed interval or after a defined time after last usage Additional functions with ECC function controller (Ethernet): ­ Peak load program for demand-oriented fitting functions ­ Cleaning system shut-down Type AQUA 505 Article No. 7612982101267 Technical specifications approx. 125 Minimum flow pressure: Calculation flow rate: Flushing flow: Flush water volume: Operating voltage: Power consumption: Communication: Type of protection: 1. 2 ­ 4. 0 bar 1. 0 l/s 1. 0 ­ 1. 3 l/s 6 ­ 9 l adjustable 24 V DC 3. 5 W Ethernet via ECC function controller IP 68 Note: A power supply unit is essential for the function of the fitting. It must be ordered separately (see accessories) All components required for expanding the system, for example the ECC function controller, electric T-junction and the system line must be ordered separately (see accessories) 7 Accessories Wall spout and shower head Text for specifications Wall spout 15 with theft-proof aerator, angle of inclination 10°. AQRM 905 AQRM 906 AQRM 907 7612982000263 7612982000287 7612982000294 Projection 234 mm Projection 165 mm Projection 78 mm Text for specifications AQUAJET-Slimline shower head DN 15 with plastic jet face with anti-calcification system and low aerosol formation. With push fit connection spigots for wall connection, including flow-rate controller with constant volume flow from 1. 0 bar flow pressure. Polished chromed brass. Type AQUA 751 AQUA 752 Article No. 7612982098727 7612982098734 0. 15 l/s 0. 20 l/s Technical specifications Minimum flow pressure: 1. 0 bar Calculation flow rate: 0. 15 l/s resp. 0, 20 l/s from 1 bar flow pressure 8 Accessories Power supplies without data communication Text for specifications Compact power supply ­ A3000 open in waterproof housing, for supplying power to AQUA 3000 open fittings/electronic system modules with up to 100m cable length. [. . . ] 200 m (without data communication) 9 Accessories ECC function controller Text for specifications ECC function controller ­ A3000 open with an Ethernet connection for the network level and a CAN-BUS connection for the fittings level as well as an integrated power supply. For connecting a maximum of 32 AQUA 3000 open fittings/electronic system modules which can supply power and facilitate external control, for example to set fittings and for communication. Z-AQUA 013 7612982074790 Text for specifications Terminating resistor ­ A3000 open for bilaterally terminating the network cable to ensure proper data communication. [. . . ]