User manual FRANKE MEDICAL BROCHURE

[. . . ] Medical and Laboratory Products A N E X T E N S I V E R A N G E O F S TA N D A R D P R O D U C T S Smart Hygiene Solutions. Franke Sissons Franke Sissons Ltd. . . . . serving our customers for 225 years. The original Company was formed in 1784 as silversmiths in Sheffield, England and during the past 225 years has gained an international reputation for manufacturing and supplying quality, well designed and durable products for a wide range of commercial applications. Franke Sissons are suppliers to many well known blue chip clients in the UK, Ireland and Worldwide including: Asda and the Walmart Group Marks and Spencer Sainsburys Warner Holidays Youth Hostel Association Astra Zenica Wolseley Group Saint Gobain Group BSS Group NHS Trusts Unilever ARUP Nightingale Architects Lorne Stewart Haden Young Interserve Balfour Kilpatrick N G Bailey Sheperd Engineering Services British Airport Authority Capita Percy Thomas Architects Ministry of Defence Midland Mainline Emcor HSBC University of London University of Leicester Rugby Football Union Scott Tallon Walker Architects Skanska Mitie Group Briggs & Forrester Crown House Engineering Spie Matthew Hall News International Franke Sissons products are covered in part or wholly by the following Approvals and Standards: 001 ISO9001:2000 Franke Sissons Ltd, Carrwood Road, Sheepbridge, Chesterfield S41 9QB, England Tel +44 (0)1246 450255, Fax +44 (0)1246 451276, Email ws. uk@franke. com, www. franke-sissons. co. uk, www. franke-ws. com MEDICAL AND LABORATORY PRODUCTS TETULA Franke have an extensive range of standard products suitable for Hospital, Laboratory and Medical applications. The Hospital products of sluice sinks, plaster sinks, scrub-up troughs, sink bowls and tops and combination sluice sinks are suitable for Hospital wards, Accident and Emergency rooms, Operating Theatres, Nursing Homes and Doctor's surgeries. Product features: - Comply with HTM64 sanitaryware guidelines - Comply with HTM63 laboratory furniture guidelines - Sink tops available in 304 and 316 stainless steel material - Full range of fittings for the sink and sanitaryware products - Custom made hospital and laboratory products available, details on request Description Hand Wash Stations HTM 64 Sinks Sit on Sinks HTM 63 Sinks Laboratory Worktops and Sinks Laboratory Cabinets Inset Sinks Page 6 7-10 11-12 13 14 14 15 Description Inset Sink Bowls Hospital Disposal Sinks Domestic Disposal Sinks Janitorial Unit Plaster Sinks Scrub Up Troughs Page 16-17 18-19 20 21 22 23 An Extensive Range of Products In addition to the range of sluice and sink products are an extensive range of stainless steel Grab Rails available in a satin polished finish or white powder coated paint finish. [. . . ] Suitable for mounting onto either a cabinet or stainless steel front leg supports and cantilevered brackets - see extras below. No tapholes are provided therefore any taps to be fitted must be mounted onto the wall. external: 1000x600x200 bowl: 400x400x180 B50081L/R Extras: F2039 38mm vulcathene waste outlet and plug (No overflow) F6010 Set of four cabinet fixing clips G26523L/R Pair of stainless steel cantilever brackets G26524L/R Pair of stainless steel front leg supports GO TO > Franke Water Controls, Showers & Flushing Valves Brochure - for details of suitable taps Single Bowl/Single Drainer Sink A single bowl/single drainer sink manufactured from 1. 2mm thick, grade 1. 4301 (304) stainless steel, satin polish finish. The sink top is turned down on three edges with an upstand at the rear and incorporates a wet area recess. Suitable for mounting onto either a cabinet or stainless steel front leg supports and cantilevered brackets - see extras below. external: 1000x600x200 bowl: 400x400x180 B20081L/R Extras: F2119 38mm waste, plug, chain and overflow Taphole Positions F6010 Set of four cabinet fixing clips G26523L/R Pair of stainless steel cantilever brackets G26524L/R Pair of stainless steel front leg supports GO TO > Franke Water Controls, Showers & Flushing Valves Brochure - for details of suitable taps 11 Sit On Sinks - 600mm wide, (316 & 304 Material) Picture / Diagram All dimensions in mm Code / Description Single Bowl/Double Drainer Sink A single bowl/double drainer sink manufactured from 1. 2mm thick, grade 1. 4404 (316) stainless steel, satin polish finish. The sink top is turned down on three edges with an upstand at the rear and incorporates a wet area recess. Suitable for mounting onto either a cabinet or stainless steel front leg supports and cantilevered brackets - see extras below. No tapholes are provided therefore any taps to be fitted must be mounted onto the wall. external: 1500x600x200 bowl: 400x400x180 B50074D GO TO > Franke Water Controls, Showers & Flushing Valves Brochure - for details of suitable taps Extras: F2039 38mm vulcathene waste outlet and plug (No overflow) F6010 Set of four cabinet fixing clips G26523L/R Pair of stainless steel cantilever brackets G26524L/R Pair of stainless steel front leg supports Single Bowl/Double Drainer Sink A single bowl/double drainer sink manufactured from 1. 2mm thick, grade 1. 4301 (304) stainless steel, satin polish finish. The sink top is turned down on three edges with an upstand at the rear and incorporates a wet area recess. Suitable for mounting onto either a cabinet or stainless steel front leg supports and cantilevered brackets - see extras below. external: 1500x600x200 bowl: 400x400x180 B20074D GO TO > Franke Water Controls, Showers & Flushing Valves Brochure - for details of suitable taps Extras: F2119 38mm waste, plug, chain and overflow F6010 Set of four cabinet fixing clips G26523L/R Pair of stainless steel cantilever brackets G26524L/R Pair of stainless steel front leg supports 12 HTM 63 Style Sit On Sinks - 650mm wide Picture / Diagram All dimensions in mm Code / Description Sit On Sinks with Radiused Front Edge A range of sinks manufactured from 1. 2mm thick, grade 1. 4301 (304) stainless steel, satin polish finish. Available in different formats, single bowl, double bowl, single drainer and double drainer models - see illustrations opposite. Each sink profile incorporates a radiused front edge together with a radiused internal corner at the base of the upstand. All sink bowls are prepared for a 38mm waste outlet which can be supplied as an extra. All the sink units are suitable for mounting onto cabinets, front leg supports or cantilevered brackets - see extras listed below. external: 1000x650x220 G22048L/R Single bowl, single drainer, no tapholes G22048LT/RT Single bowl, single drainer with 2 tapholes at 200mm centres G22048L/R external: 1200x650x220 G22049L/R Single bowl, single drainer, no tapholes G22049LT/RT Single bowl, single drainer with 2 tapholes at 200mm centres external: 1500x650x220 G22050L/R Single bowl, single drainer, no tapholes G22050LT/RT Single bowl, single drainer with 2 tapholes at 200mm centres G22049L/R external: 1500x650x220 G22051N Single bowl, double drainer, no tapholes G22051NT Single bowl, double drainer with 2 tapholes at 200mm centres external: 1800x650x220 G22052N Single bowl, double drainer, no tapholes G22052NT Single bowl, double drainer with 2 tapholes at 200mm centres G22050L/R external: 1800x650x220 G22053N Double bowl, double drainer, no tapholes G22053NT Double bowl, double drainer with 2 tapholes at 200mm centres bowl: 500x400x200 Extras: F2068 38mm flush grated waste outlet GO TO > Franke Water Controls, Showers & Flushing Valves Brochure - for details of suitable taps G22051L/R F6010 Set of four cabinet fixing clips G26523L/R Pair of stainless steel cantilever brackets G26524L/R Pair of stainless steel front leg supports G26527N 3 stainless steel front leg supports (for 1800mm long units, G22052N and G22053N) G26528N 3 stainless steel cantilever brackets (for 1800mm long units, G22052N and G22053N) G22052N G22053N 13 Laboratory Worktops, Sinks and Cabinets Picture / Diagram All dimensions in mm Code / Description Worktops, Sinks and Hoppers for Laboratories Specially manufactured worktops, sinks and hoppers can be manufactured from 1. 2mm thick, grade 1. 4301 (304) or 1. 4404 (316) stainless steel, satin polish finish. Worktops can be flat or incorporate a pressed recess suitable for most applications. The illustrations opposite show examples but others are available on request. However the units can also be mounted on either stainless steel cantilevered brackets or stainless steel front leg supports. Profile of front turndown Example of pressed worktop fitted with sink bowl and sluice hopper Example of pressed worktop fitted with sink bowl and drainer 550, 600 & 650mm Wide Worktops for Laboratories Specially manufactured worktops in widths of 550, 600 and 650mm can be manufactured from 1. 2mm thick, grade 1. 4301 (304) or 1. 4404 (316) stainless steel, satin polish finish. Standard worktops are supplied with a flat top, however worktops with a pressed recess can also be supplied. [. . . ] Unit can be mounted on either stainless steel cantilever brackets or stainless steel front leg supports. Front leg supports give a working height of 900mm and have adjustable feet which can be screwed to the floor for extra stability. external: 1600x600x300 sluice hopper: 375/110x300 wash bowl: 500x400x200 G22018L/R Suitable for duct mounting G22018LT/RT Suitable for duct mounting with 2 tapholes at 200mm centres G22027L/R Suitable for surface mounting G22027LT/RT Suitable for surface mounting with 2 tapholes at 200mm centres Extras: Illustrations show front leg supports fitted B4052 110mm stainless steel P trap B4059 110mm stainless steel S trap F3018 9 litre plastic cistern with brass waste G20605N 6, 7 & 9 litre stainless steel cistern B4215 Stainless steel downpipe B3022 Plastic downpipe G26523L/R Pair of stainless steel cantilevered brackets G26524L/R Pair of stainless steel front leg supports G26542N Stainless steel outlet grating G25147N 38mm waste, plug and chain GO TO > Franke Water Controls, Showers & Flushing Valves Brochure - for details of suitable taps * When a top central entry is supplied this dimension is 270mm Surface mounted Duct mounted 19 Domestic Services Disposal Sink - DUG Picture / Diagram All dimensions in mm Code / Description DUG Domestic Services Disposal Sink Wall Hung A wall hung domestic services disposal unit manufactured from 1. 2mm thick, grade 1. 4301 (304) stainless steel with a satin polish finish. Incorporating a sluice hopper which is suitable for either top entry or duct mounted services. [. . . ]