User manual FOSTEX UR-2

[. . . ] 8289647000 (480799) Model UR-2 STEREO RACK MEMORY RECORDER POWER AUTO PLAY PHONES EDIT USB (KYBD ONLY) PC USB HOST SD-1 MIN MAX SD-1 SD-2 EJECT READY SD-2 FILE SEL REPEAT REC DISPLAY MRGN RST STOP PLAY PREV REW CUE NEXT F FWD TIME EDIT MIC SET SHIFT PLAY MODE MENU / ENTER TIME REC RDY EXIT FILE/CURSOR CUE/LOCATE MIC IN PHANTOM UR-2 STRG SEL STEREO RACK MEMORY RECORDER ABS 0 REC END MIN MAX MIN MAX INPUT LEVEL MIC GAIN MIC IN Owner's Manual Model UR-2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU' AU FOND. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. "WARNING" "TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. " SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. [. . . ] You can also output the microphone signal alone while the unit is stopped. When you mix the microphone signal with the file playback sound, the file playback sound is attenuated by 6 dB by default. For the details about settings for microphone usage, see "Using an external microphone" on page 38. 2) Use the [MENU] dial to select "FILE SEL" and press the [ENTER] key. The display shows the file selection screen. -42- Model UR-2 <Playback> Playback in ALL play mode When you select the ALL play mode, " on the display. " lights Playback in RELAY play mode When you select the RELAY play mode, " lights on the display. " In the ALL play mode, the unit continuously plays back all files on the current storage device in recording order. (If you want to play back files randomly, use the CHAIN ALL play mode described later. ) When finishing playback of the last file, the unit stops at the finishing position. Normally the unit plays back files on the current storage device in the recording order. However, using the [ ] or [ ] key or from the file selection screen, you can select a desired file to be played back (see page 42). In the RELAY play mode, the unit continuously plays back all files on the current storage device, and switches the current storage device, then continuously plays back all files on the next current storage device. <Note>: When two storage devices are set, if you select the RELAY play mode and then remove one of the storage devices, the unit cancels the RELAY play mode and enters the ALL play mode. <Memo>: The current storage device changes in the following order. <Note>: If you select a file from which playback starts, the files created earlier than the selected file are not played back. For example, if you select the "005" file when the current storage device has ten files from "001" through "010", files 005 through 010 are played back but files 001 through 004 are not played back. SD1 LOCK LOCK SD2 USB <Note>: If you copy files recorded using a computer to an SD card and set the SD card to the UR-2, the unit basically plays back files on the card in the order of file copying to the card. However, a file whose file name has been edited by a computer may be played back at the last. <Note>: When the unit switches the current storage device, it takes some time for loading so there is a silent space of a few seconds. <Memo>: By activating the repeat function, you can play back files repeatedly until you stop by pressing the [STOP] key (see page 54). <Note>: When more than one folder exists on the current storage device, after the unit finishes playback of the last file of the current folder, it switches the current storage device to the next one. <Note>: When the unit switches the storage device to the next one which has more than one folder, the unit brings up the folder selection screen and stops (see page 29). <Memo>: The unit plays back file in the recording order. Even if you edit a file name, the playback order does not change. <Memo>: When playing back a file, you can mix a microphone signal and output the mixed signal (see page 38). -43- Model UR-2 <Playback> Playback in CHAIN SINGLE play mode When you select the CHAIN SINGLE play mode, " lights on the display, while the " unit reads the chain play list information and stops at the beginning of the first file in the list. Playback in CHAIN ALL play mode When you select the CHAIN ALL play mode, " " lights on the display, while the unit reads the chain play list information and stops at the beginning of the first file in the list. <Note>: When no chain play list is created, "CHAIN LIST Empty!" is briefly shown followed by the following screen. In this case, create the chain play list and select the CHAIN SINGLE play mode again. See page 46 for details about how to create the chain play list. <Note>: When no chain play list is created, "CHAIN LIST Empty!" is briefly shown followed by the following screen. In this case, create the chain play list and select the CHAIN ALL play mode again. See page 46 for details about how to create the chain play list. In the CHAIN SINGLE play mode, the unit plays back a selected file in the chain play list. After finishing playback, the unit stops at the beginning of the next file. To play back a different file, select a desired file using the [ ] or [ ] key, or using the file selection screen (see page 42). <Memo>: By activating the repeat function, you can play back a file repeatedly until you stop by pressing the [STOP] key (see page 54). In the CHAIN ALL play mode, the unit continuously plays back all files in the chain play list from the first file. After finishing playback of the last file in the chain play list, the unit stops at the beginning of the first file. To start playback from a desired file, select the ] or [ ] key, or using the file file using the [ selection screen (see page 42). <Note>: When the unit switches the playback file, if the next file has different FS/bit, it takes some time to switch the file. Therefore, there is a silent space between files. <Memo>: You can mix a microphone source while playing back a file. [. . . ] You may also have additional rights depending on the state in which the Fostex product was purchased. WARRANTY PROTECTION All Fostex parts are warranted for one (1) year from the date of original purchase, except for recording media, such as hard disc drives and compact flash cards, heads, lamps and fuses, which are warranted, for one hundred-eighty (180) days. Fostex America will repair and / or replace parts during the term of this warranty. Labor costs are also covered by Fostex America for one (1) year from the date of original purchase. Except as specified below, this warranty covers all defects in material and workmanship in this product. [. . . ]