User manual FORIS FORIS FS2333

[. . . ] Important Please read PRECAUTIONS, this User’s Manual, and the Setup Guide (separate volume) carefully to familiarize yourself with safe and effective usage. € Please refer to the Setup Guide for basic information ranging from connection of the monitor to a PC or external device to using the monitor. € The latest User’s Manual is available for download from our web site: http://www. Com Location of Caution Statement <For USA-California Only> CR Coin Lithium Battery contains Perchlorate Material - special handling may apply. [. . . ] Choose “Monitor Settings” in the Setting menu, and press 2. Choose “Logo” in the “Monitor Settings” menu, and press The “Logo” menu appears. Setting Language This function allows you to select a language for the Setting menu or displaying message. selectable languages English , German , French , Spanish , Italian , Swedish , Japanese , Simplified Chinese , Traditional Chinese Procedure 1. Choose “Monitor Settings” in the Setting menu, and press 2. Choose “Language” in the “Monitor Settings” menu, and press The “Language” menu appears. Changing the authentication method for HDMI signal input The external device cannot be authenticated successfully according to your external device and the screen cannot be displayed. In this case, follow the procedures below to change the authentication method. Press on the remote control or on the monitor to turn OFF the monitor power. Note • The current authentication method can be identified based on the color used to display the input port or signal error. Resetting the Monitor to the Default Settings There are two different Resets: Color Reset for only resetting the color adjustments to the default settings and Full Reset for resetting all settings to the defaults. Note • Regarding the default setting, see “Main Default Settings” (page 52). To ●● reset the color adjustments Procedure This function only resets the color adjustments for the currently selected mode to the default settings. Choose “Color Reset” in the “Color” menu, and press 3. Chapter 3 Setting Monitor 31 To ●● reset all adjustments to the default settings This function resets all adjustments to the default settings. Attention • The reset operation cannot return the authentication method for HDMI signal input (“3-8. Changing the authentication method for HDMI signal input” (page 31)) and the exiting method from the power saving mode (“To change the exiting method from the power saving mode” (page 37)) to the default setting. Choose “Monitor Settings” in the Setting menu, and press 2. Choose “Reset” in the “Monitor Settings” menu, and press 3. Using Smart Function “Smart Detection” “Smart Resolution” “Smart Insight” Smart Detection This function allows you to select the area on the screen to which the “Smart Resolution” or “Smart Insight” setting is applied (only animated images or whole screen). This function adjusts the perceived resolution of the images so that the blurs are reduced and images are displayed vividly and clearly. In addition, you can correct the color of skin and text affected by the “Smart Resolution” settings. [. . . ] temperature Color temperature is a method to measure the white color tone , generally indicated in degrees Kelvin. The screen becomes reddish at a low temperature, and bluish at a high temperature, like the flame temperature. 5000K: Slightly reddish white 6500K: White referred to as daylight-balanced color 9300K: Slightly bluish white TMDS (Transition Minimized Differential Signaling) TMDS is one of the signal transmission methods for the digital interface. Chapter 8 Reference 55 VESA DPM (Video Electronics Standards Association - Display Power Management) VESA specifications achieve increased energy efficiency for computer monitors. [. . . ]