User manual FORD EDGE 2008

[. . . ] Table of Contents Introduction Instrument Cluster Warning lights and chimes Gauges 4 10 10 15 Entertainment Systems How to get going AM/FM stereo with CD AM/FM stereo with in-dash six CD Auxiliary input jack (Line in) USB port Satellite radio information Family entertainment system Navigation system SYNC 18 18 22 30 38 39 43 45 74 74 Climate Controls Manual heating and air conditioning Automatic temperature control Rear window defroster 75 75 77 80 Lights Headlamps Turn signal control Bulb replacement 81 81 85 86 Driver Controls Windshield wiper/washer control Steering wheel adjustment Power windows Mirrors Speed control Message center 91 91 92 96 97 99 109 1 2008 Edge (edg) Owners Guide (post-2002-fmt) USA (fus) Table of Contents Locks and Security Keys Locks Anti-theft system 126 126 128 141 Seating and Safety Restraints Seating Safety restraints Airbags Child restraints 145 145 156 171 186 Tires, Wheels and Loading Tire information Tire inflation Tire Pressure Monitoring System (TPMS) Vehicle loading Trailer towing Recreational towing 198 200 202 215 219 225 229 Driving Starting Brakes Traction ControlTM/AdvanceTrac Transmission operation 231 231 236 238 242 Roadside Emergencies Getting roadside assistance Hazard flasher switch Fuel pump shut-off switch Fuses and relays Changing tires Lug nut torque Jump starting Wrecker towing 254 254 255 256 256 264 269 270 275 2 2008 Edge (edg) Owners Guide (post-2002-fmt) USA (fus) Table of Contents Customer Assistance Reporting safety defects (U. S. only) Reporting safety defects (Canada only) 277 283 284 Cleaning Maintenance and Specifications Engine compartment Engine oil Battery Engine coolant Fuel information Air filter(s) Part numbers Maintenance product specifications and capacities Engine data 285 292 294 296 300 302 307 321 323 324 326 Accessories Index 329 331 All rights reserved. Reproduction by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company. Ford may change the contents without notice and without incurring obligation. [. . . ] If the air bag has deployed, the air bag will not function again and must be replaced immediately. If the air bag is not replaced, the unrepaired area will increase the risk of injury in a collision. The SRS consists of: · driver and passenger airbag modules (which include the inflators and airbags) · seat-mounted side airbags . Refer to Seat-mounted side airbag system later in this chapter · safety belt pretensioners · one or more impact and safing sensors 174 2008 Edge (edg) Owners Guide (post-2002-fmt) USA (fus) Seating and Safety Restraints · a readiness light and tone · and the electrical wiring which connects the components · Side curtain airbag system. · "Passenger airbag off" or "pass airbag off" indicator lamp. The diagnostic module monitors its own internal circuits and the supplemental airbag electrical system wiring (including the impact sensors), the system wiring, the airbag system readiness light, the airbag back up power, the airbag ignitors and safety belt pretensioners. Front passenger sensing system The front passenger sensing system is designed to meet the regulatory requirements of Federal Motor Vehicle Safety Standard (FMVSS) 208 and is designed to disable (will not inflate) the front passenger's frontal airbag under certain conditions. The front passenger sensing system works with sensors that are part of the front passenger's seat and safety belt. The sensors are designed to detect the presence of a properly seated occupant and determine if the front passenger's frontal airbag should be enabled (may inflate) or disabled (will not inflate). The front passenger sensing system will disable (will not inflate) the front passenger's frontal airbag if: · the front passenger seat is unoccupied, or has small/medium objects in the front seat. · the system determines that an infant is present in a rear-facing infant seat that is installed according to the manufacturer's instructions. · the system determines that a small child is present in a forward-facing child restraint that is installed according to the manufacturer's instructions. · the system determines that a small child is present in a booster seat. · a front passenger takes his/her weight off of the seat for a period of time. 175 2008 Edge (edg) Owners Guide (post-2002-fmt) USA (fus) Seating and Safety Restraints The front passenger sensing system uses a passenger airbag off or pass airbag off indicator which will illuminate and stay lit to remind you that the front passenger frontal airbag is disabled. The indicator lamp is located in the center stack of the instrument panel above the climate controls. Note: The indicator lamp will illuminate for a short period of time when the ignition is turned to the ON position to confirm it is functional. When the front passenger seat is not occupied (empty seat) or in the event that the front passenger frontal airbag is enabled (may inflate), the indicator lamp will be unlit. The front passenger sensing system is designed to disable (will not inflate) the front passenger's frontal airbag when a rear facing infant seat, a forward-facing child restraint, or a booster seat is detected. · When the front passenger sensing system disables (will not inflate) the front passenger frontal airbag, the indicator lamp will illuminate and stay lit to remind you that the front passenger frontal airbag is disabled. · If the child restraint has been installed and the indicator lamp is not lit, then turn the vehicle off, remove the child restraint from the vehicle and reinstall the restraint following the child restraint manufacturer's instructions. The front passenger sensing system is designed to enable (may inflate) the front passenger's frontal airbag anytime the system senses that a person of adult size is sitting properly in the front passenger seat. [. . . ] Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. 4 Automatic transmissions that require MERCON V should only use MERCON V fluid or fluid that is specified dual usage MERCON /MERCON V. Refer to scheduled maintenance information to determine the correct service interval. [. . . ]