User manual FORD CROWN-VICTORIA-2003

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FORD CROWN-VICTORIA-2003. We hope that this FORD CROWN-VICTORIA-2003 user guide will be useful to you.


FORD CROWN-VICTORIA-2003 : Download the complete user guide (2959 Ko)

Manual abstract: user guide FORD CROWN-VICTORIA-2003

Detailed instructions for use are in the User's Guide.

[. . . ] Table of Contents Introduction Instrument Cluster Warning and control lights Gauges 4 10 10 16 Entertainment Systems AM/FM stereo cassette with CD AM/FM stereo cassette AM/FM stereo CD changer 22 22 31 38 42 Climate Controls Manual heating and air conditioning Electronic automatic temperature control 47 47 49 Lights Headlamps Turn signal control Bulb replacement 54 54 56 56 Driver Controls Windshield wiper/washer control Steering wheel adjustment Power windows Mirrors Speed control Message center 63 63 64 74 75 77 86 Locks and Security Keys Locks Anti-theft system 93 93 93 95 1 Table of Contents Seating and Safety Restraints Seating Safety restraints Air bags Child restraints 106 106 110 125 132 Driving Starting Brakes Traction control Air suspension Transmission operation Vehicle loading Trailer towing 143 143 147 149 151 152 156 158 Roadside Emergencies Getting roadside assistance Hazard flasher switch Fuel pump shut-off switch Fuses and relays Changing tires Jump starting Wrecker towing 162 162 163 163 164 171 176 181 Customer Assistance Reporting safety defects (U. S. only) 182 190 Cleaning 191 2 Table of Contents Maintenance and Specifications Engine compartment Engine oil Battery Fuel information Air filter(s) Part numbers Refill capacities Lubricant specifications 197 199 200 204 212 225 230 230 232 Accessories Index 237 240 All rights reserved. Reproduction by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company. Ford may change the contents without notice and without incurring obligation. [. . . ] The air bag was designed to inflate between the door panel and occupant to further enhance the protection provided occupants in side impact collisions. The air bag SRS is designed to activate when the vehicle sustains lateral deceleration sufficient to cause the sensors to close an electrical circuit that initiates air bag inflation. The fact that the air bags did not inflate in a collision does not mean that something is wrong with the system. Rather, it means the forces were not of the type sufficient to cause activation. Side air bags are designed to inflate in side-impact collisions, not roll-over, rear-impact, frontal or near-frontal collisions, unless the collision causes sufficient lateral deceleration. Do not touch them after inflation. If the side air bag has deployed, the air bag will not function again. The side air bag system (including the seat) must be inspected and serviced by a qualified technician in accordance with the vehicle service manual. If the air bag is not replaced, the unrepaired area will increase the risk of injury in a collision. Determining if the system is operational The SRS uses a readiness light in the instrument cluster or a tone to indicate the condition of the system. Refer to the Air bag readiness section in the Instrument cluster chapter. A difficulty with the system is indicated by one or more of the following: · The readiness light (same light as for front air bag system) will either flash or stay lit. 131 Seating and Safety Restraints · The readiness light will not illuminate immediately after ignition is turned on. The tone pattern will repeat periodically until the problem and/or light are repaired. If any of these things happen, even intermittently, have the SRS serviced at your dealership or by a qualified technician immediately. Unless serviced, the system may not function properly in the event of a collision. Disposal of air bags and air bag equipped vehicles (including pretensioners) See your local dealership or qualified technician. SAFETY RESTRAINTS FOR CHILDREN See the following sections for directions on how to properly use safety restraints for children. Also see Air bag supplemental restraint system (SRS) in this chapter for special instructions about using air bags. Important child restraint precautions You are required by law to use safety restraints for children in the U. S. If small children (generally children who are four years old or younger and who weigh 18 kg [40 lbs] or less) ride in your vehicle, you must put them in safety seats made especially for children. Check your local and state or provincial laws for specific requirements regarding the safety of children in your vehicle. When possible, always place children under age 12 in the rear seat of your vehicle. Accident statistics suggest that children are safer when properly restrained in the rear seating positions than in the front seating position. [. . . ] Engine oil need only meet the requirements of Ford specification WSS-M2C153­H and the API Certification mark. 231 Maintenance and Specifications LUBRICANT SPECIFICATIONS Item Brake fluid Ford part name Motorcraft High Performance DOT 3 Motor Vehicle Brake Fluid 1 Silicone Lubricant Motorcraft Premium Gold Engine Coolant (yellow-colored) Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil (US) Motorcraft SAE 5W-20 Super Premium Motor Oil (Canada) Multi-Purpose Grease Ford part number PM-1 Ford specification ESA-M6C25-A and DOT 3 Door weatherstrips Engine coolant F7AZ-19G208-BA ESR-M13P4-A and F5AZ-19553-AA VC-7­A WSSM97B51­A1 Engine oil XO-5W20-QSP (US) CXO-5W20­LSP12 (Canada) WSS-M2C153-H with API Certification Mark Hinges, latches, striker plates, fuel filler door hinge and seat tracks Lock cylinders Power steering fluid Automatic transmission XG-4 or ESR-M1C159-A F5AZ-19G209-AA Penetrating and Lock Lubricant Motorcraft MERCON ATF Motorcraft MERCON V ATF3 Motorcraft XL-1 XT-2-QDX XT-5-QM none MERCON MERCON V 232 Maintenance and Specifications Item Rear Axle Lubricant 2 Ford part name Motorcraft SAE 80W-90 Premium Rear Axle Lubricant Ultra-clear Windshield Washer Concentrate Ford part number XY-80W90-QL Ford specification WSP-M2C197-A Windshield washer fluid ZC-18­A ESR-M17P5-A Use only brake fluids certified to meet Ford specifications. Add 118 ml (4 oz. ) of Additive Friction Modifier XL-2 or equivalent meeting Ford specification EST-M2C118-A for complete refill of Traction-Lok rear axles. 3 Ensure the correct automatic transmission fluid is used. Transmission fluid requirements are indicated on the dipstick or on the dipstick handle. Refer to your scheduled maintenance guide to determine the correct service interval. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE FORD CROWN-VICTORIA-2003




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FORD CROWN-VICTORIA-2003 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.