User manual FORD CROWN VICTORIA-2007

[. . . ] Table of Contents Introduction Instrument Cluster Warning lights and chimes Gauges 4 10 10 15 Entertainment Systems AM/FM AM/FM AM/FM AM/FM stereo stereo with CD stereo cassette with CD stereo with in-dash six CD 18 18 20 23 28 Climate Controls Manual heating and air conditioning Automatic temperature control Rear window defroster 34 34 35 37 Lights Headlamps Turn signal control Bulb replacement 38 38 40 41 Driver Controls Windshield wiper/washer control Steering wheel adjustment Power windows Mirrors Speed control Moon roof Message center 48 48 49 60 61 62 66 71 Locks and Security Keys Locks Anti-theft system 81 81 81 89 1 2007 Crown Victoria (cro) Owners Guide (post-2002-fmt) USA (fus) Table of Contents Seating and Safety Restraints Seating Safety restraints Airbags Child restraints 97 97 102 116 128 Tires, Wheels and Loading Tire information Vehicle loading Trailer towing Recreational towing 140 140 155 161 164 Driving Starting Brakes Traction ControlTM Air suspension Transmission operation 165 165 169 172 174 175 Roadside Emergencies Getting roadside assistance Hazard flasher switch Fuel pump shut-off switch Fuses and relays Changing tires Lug nut torque Jump starting Wrecker towing 181 181 182 183 184 192 198 199 204 Customer Assistance Reporting safety defects (U. S. only) Reporting safety defects (Canada only) 205 211 212 Cleaning 213 2 2007 Crown Victoria (cro) Owners Guide (post-2002-fmt) USA (fus) Table of Contents Maintenance and Specifications Engine compartment Engine oil Battery Engine coolant Fuel information Air filter(s) Part numbers Maintenance product specifications and capacities Engine data 220 222 224 227 229 235 251 252 253 256 Accessories Index 259 261 All rights reserved. Reproduction by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company. Ford may change the contents without notice and without incurring obligation. [. . . ] Contact the manufacturer of your child seat for information about ordering a tether strap. The rear seats of your vehicle are equipped with built-in tether strap anchors located behind the seats as described below. The tether anchors in your vehicle are located under a cover marked with the tether anchor symbol (shown with title). The tether strap anchors in your vehicle are in the following positions (shown from top view): Attach the tether strap only to the appropriate tether anchor as shown. The tether strap may not work properly if attached somewhere other than the correct tether anchor. For vehicles with adjustable head restraints, route the tether strap under the head restraint and between the head restraint posts, otherwise route the tether strap over the top of the seatback. Locate the correct anchor for the selected seating position. 137 2007 Crown Victoria (cro) Owners Guide (post-2002-fmt) USA (fus) Seating and Safety Restraints 4. If the tether strap is clipped incorrectly, the child safety seat may not be retained properly in the event of a collision. 6. Install the child safety seat tightly using the LATCH anchors or safety belts. Tighten the child safety seat tether strap according to the manufacturer's instructions. If the safety seat is not anchored properly, the risk of a child being injured in a collision greatly increases. Attaching safety seats with LATCH (Lower Anchors and Tethers for Children) attachments Some child safety seats have two rigid or webbing mounted attachments that connect to two anchors at certain seating positions in your vehicle. This type of child seat eliminates the need to use safety belts to attach the child seat. For forward-facing child seats, the tether strap must also be attached to the proper tether anchor. See Attaching safety seats with tether straps in this chapter. 138 2007 Crown Victoria (cro) Owners Guide (post-2002-fmt) USA (fus) Seating and Safety Restraints Your vehicle has LATCH anchors for child seat installation at the seating positions marked with the child seat symbol. The anchors on both sides of the center of the rear seat are provided for child seats at the outboard seats, and are further apart than the pairs of lower anchors for child seat installation at other seats. DO NOT install child seats with LATCH attachments (rigid or mounted on belt webbing) to the lower anchors at the center rear seat. If you install a child seat at the center rear position, use the vehicle belt and the top tether anchor. In a crash, one anchor may not be strong enough to hold two child safety seat attachments and may break, causing serious injury or death. Follow the child seat manufacturer's instructions to properly install a child seat with LATCH attachments. Attach LATCH lower attachments of the child seat only to the anchors shown. If you install a child seat with rigid LATCH attachments, do not tighten the tether strap enough to lift the child seat off the vehicle seat cushion when the child is seated in it. [. . . ] Use of any fluid other than the recommended fluid may cause transmission damage. 6 Rear axles are considered lubricated for life when the vehicle is used for normal service. For severe duty requirements, see Exceptions and / or Special Operating Conditions in scheduled maintenance information. 7 Service refill capacities are determined by filling the rear axle 1/4 inch to 9/16 inch (6 mm to 14 mm) below the bottom of the filler hole. [. . . ]