User manual FIELD CONTROLS 46178400
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FIELD CONTROLS 46178400. We hope that this FIELD CONTROLS 46178400 user guide will be useful to you.
 |
FIELD CONTROLS 46178400 : Download the complete user guide (115 Ko) |
Manual abstract: user guide FIELD CONTROLS 46178400
Detailed instructions for use are in the User's Guide.
[. . . ] Remove the clamps from the conduit and motor and disconnect the motor lead wires from the control kit. [. . . ] Rotate the motor assembly counterclockwise and slide the assembly into the center, then pull the motor assembly out of the unit. Remove the electrical box cover from the motor and disconnect the conduit and wires. (See Figure 4) You do not need to disconnect the wires from the control kit. Rotate the motor assembly counterclockwise and slide the assembly into the center, then pull the motor assembly out of the unit. Locate the motor assembly into position by sliding the assembly over the mounting holes in the front plate. (See Figure 6) Secure motor assembly into position at the four corners, then secure center two holes. Use the top knockout on the electrical box and reattach the flexible conduit and wires to the motor using the provided conduit connector and wire nuts. NOTE: If the old motor had conduit clamps, then pull the provided wires through the conduit and connect to the control kit in the appropriate location. [. . . ] Seal the top edge of the motor assembly with a high temperature silicone sealant. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE FIELD CONTROLS 46178400
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FIELD CONTROLS 46178400 will begin.