User manual FESTOOL TS 75 BROCHURE

[. . . ] It is housed within the practical depot and is always within easy reach ­ thus allowing you to work in safety. w!Ne plug it connection and Softgrip Rotating extractor connector. More freedom of movement, less wear. The extractor hose never gets tangled, does not get in the way and is, therefore, always where it should be ­ this is good for your health. Sliding clutch. If the saw blade gets jammed, the sliding clutch prevents the saw from jolting back. w! [. . . ] They also enable you to saw thick workpieces with just one cut - no need to work from two sides. This minimises reworking and saves you having to go to the trouble of turning the workpiece. A principle of flexibility. The TS 75 really comes into its own when 65 mm machines reach their limits. The unbeatable plunge-cutting principle combined with the appropriate saw blade enable you to easily master trimming work in virtually all materials up to 75 mm thick (eg sandwich boards or cable ducts). Angles are always accurate. With the TS 75, accurate cutting of angles is a matter of course. Here, the scribe line is always the same as the cutting edge, even when the saw blade is swivelled. And this can be set accurately from 0° to 47° on the easy-to-read scale. Why struggle when it can be done using FastFix? Often, the same saw blade is used to cut all different kinds of materials. Below shows how easy it is to change a saw blade. 1 2 Open the FastFix lever, press the machine down as if you are plungecutting until you hear it engage. Simply undo the bolt using the Allen key and remove the saw blade. 3 4 Angled cuts can be set and read precisely with the cutting indicator. The scribe line is the same as the cutting edge, even when performing angled cuts. Insert the new blade, tighten the bolt, close the FastFix lever and move the machine upwards. Done. Conclusion: This is how you gear your work towards the material: with the right saw blade. 4 ause of its size. Safe The faster way to a clean cut -- with the guide rail system from Festool. Modern portable circular saws have to meet many requirements. They have to be mobile and versatile but still have to work as precisely as bench-mounted tools. Festool building materials saws, pendulum cover saws and the famous plunge-cut saws fit perfectly onto the guide rail. The result: cuts that are as straight as they are splinter-free ­ thanks to the patented splinterguard on both sides. The TS 55 and TS 75 plunge-cut saws are true examples of versatility and mobility. They have many features such as FastFix saw blade changing system, spring-loaded spacer wedge and the intelligent MMC electronics. By the way, if you are impressed with the individual tool, you will be amazed when you see it as part of a system. Whether it be the combi-bevel, stop adapter or effortless connection to the dust extraction, everything fits and optimises your work. The spring makes the difference. When plunge-cutting, a spacer wedge that cannot be lowered gets in the way. Its spacer wedge is spring-loaded and retracts into the housing automatically when the saw is put onto the workpiece. [. . . ] 493 196 493 197 493 198 493 199 493 200 493 201 493 351 491 473 492 243 583 302 491 498 491 503 491 502 491 501 491 500 491 582 491 588 492 617 492 616 489 022 491 594 489 570 482 107 1 Panther saw blade Dimensions in mm: 210 x 30; Number of teeth: 16; Tooth shape: PW; Cutting width in mm: 2. 6 Dimensions in mm: 210 x 30; Number of teeth: 18; Tooth shape: W; Cutting width in mm: 2. 6 Dimensions in mm: 210 x 30; Number of teeth: 36; Tooth shape: W; Cutting width in mm: 2. 4 Dimensions in mm: 210 x 30; Number of teeth: 52; Tooth shape: W; Cutting width in mm: 2. 4 1) 2 3 18-tooth saw blade1) Universal saw blade1)2) Fine-tooth saw blade1) Special saw blade for laminate 4 5 Dimensions in mm: 210 x 30; Number of teeth: 60; Tooth shape: TF; Cutting width in mm: 2. 4 1) 6 Special saw blade for aluminium Flat-tooth saw blade 1) Dimensions in mm: 210 x 30; Number of teeth: 72; Tooth shape: TF; Cutting width in mm: 2. 4 Dimensions in mm: 210 x 30; Number of teeth: 36; Tooth shape: F; Cutting width in mm: 2. 2 For splinter-free cuts on both sides. in pack: 5 Can be used as parallel stop and table widener. 7 8 9 10 11 12 Splinterguard SP-TS 55/75 Parallel stop PA-TS 75 Mobile dust extractor CTM 22 E Guide rail FS 1400/2 Guide rail FS 1900/2 Guide rail FS 2400/2 Guide rail FS 3000/2 Guide rail FS 5000/2 Return stop FS-RSP Combi-bevel FS-KS Double suction lifter GECKO DOSH Adapter GECKO DOSH-FSAD Guide-rail deflector FS-AW Lever clamp FS-HZ 160 Clamps FSZ 120 Guide-rail connector FSV 3) Tested as per EN 60335/IEC 335 standard with dust category M approval. Length: 1400 mm Length: 1900 mm Length: 2400 mm Length: 3000 mm Length: 5000 mm Is inserted into the 2nd groove on the guide rail, prevents saw jolting back. [. . . ]