User manual FESTOOL TRC 3

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FESTOOL TRC 3. We hope that this FESTOOL TRC 3 user guide will be useful to you.

FESTOOL TRC 3 : Download the complete user guide (985 Ko)

You may also download the following manuals related to this product:

   FESTOOL TRC 3 (244 ko)
   FESTOOL TRC 3 (217 ko)
   FESTOOL TRC 3 (182 ko)
   FESTOOL TRC 3 (198 ko)
   FESTOOL TRC 3 (216 ko)
   FESTOOL TRC 3 (201 ko)
   FESTOOL TRC 3 (186 ko)

Manual abstract: user guide FESTOOL TRC 3

Detailed instructions for use are in the User's Guide.

 [. . . ] 50/ 70 min -5 °C to +45 °C via NTC resistor unless they are supervised by a person responsible for their safety or have been instructed on how the charger or power tool is to be used. Children should always be supervised to ensure that they do not play with the charger or the power tools.  [. . . ] All Festool battery packs of the series BPS and BPC can be loaded with the charger. If a warm NiMH battery pack (> 37 °C) is inserted,  the pack is charged with a reduced charging current and will take longer to charge.  the LED [1-2] on the charger indicates the respective operating status of the charger. LED green - flashing quickly Battery pack is charged to maximum capacity. LED green - flashing slowly Battery pack is charged with reduced current,  LiIon is charged to 80 %. LED green - lit continuously Battery pack is fully charged,  or charging is not started again,  because the battery is charged to more than 80 %. 2 Charger wall mounting TRC 3 There are two elongated holes on the back of the TRC 3 for mounting the charger to a wall using two screws (e. Observe the following instructions: ­ Keep the air slits on the machine and the charger free and clean to ensure adequate cooling. We offer a warranty for material and production defects for all our tools in accordance with the locally applicable legal provisions,  but for a minimum of 12 months. Within the EU member states,  the warranty period is 24 months (verification through invoice or delivery note). Damage caused by the operator,  natural wear,  overloading,  incorrect handling or through the use of the equipment not specified in the operating manual,  or damage which was known at the time of purchase,  is not covered by the warranty. Complaints can only be accepted if the tool is returned while still assembled to the supplier or an authorised Festool Customer Service workshop.  [. . . ] As "downstream users" and product manufacturers,  we are aware of our duty to provide our customers with information. We have set up the following website to keep you updated with all the latest news and provide you with information on all the materials used in our existing products: www.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE FESTOOL TRC 3

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FESTOOL TRC 3 will begin.