User manual FESTOOL OFK 500 Q

[. . . ] C) Safety instructions Pay attention to the safety instructions included with your tool. Do not use tools with noticeable cracks, blunt or damaged cutting edges ---> danger to live!Repairs and grinding work may only be carried out by Festool service centres or qualified experts. [. . . ] The emission values specified refer to the main applications for which the power tool is used. If the electric power tool is used for other applications, with other tools or is not maintained sufficiently prior to operation, however, the vibration and noise load may be higher when the tool is used. Take into account any machine idling times and downtimes to estimate these values more accurately for a specified time period. This may significantly reduce the load during the machine operating period. 3 Power supply and start-up The line voltage and frequency must correspond with the data on the ratings plate!Always switch the machine off before connecting or disconnecting the mains lead!4 Machine settings Always remove the power supply plug from the socket before carrying out any work on the machine. 8): - Push sliding catch to front = lock setting ring gauge, - Push sliding catch to back = unlock setting ring gauge. 2), until the locking button engages and therefore locks the spindle (2. The machine can be connected to a Festool extractor using the extraction adapter (1. 5 Working with the machine Always secure the workpiece in such a manner that it cannot move while being sawed. Set the required milling depth and steadily guide the machine along the edge of the workpiece, ensuring that the guiding table and the milling tool ball bearing are in contact with the workpiece at all times. Maintenance and care Always remove the power supply plug from the socket before carrying out any work on the machine. All maintenance and repair work which requires the motor casing to be opened may only be carried out by an authorised service centre. 7 Accessories, tools Use only original Festool accessories and Festool consumable material intended for this machine because these components are designed specifically for the machine. Using accessories and consumable material from other suppliers will most likely affect the quality of your working results and limit any warranty claims. Machine wear or your own personal workload may increase depending on the application. Protect yourself and your machine, and preserve your warranty claims by always using original Festool accessories and Festool consumable material! [. . . ] As "downstream users" and product manufacturers, we are aware of our duty to provide our customers with information. We have set up the following website to keep you updated with all the latest news and provide you with information on all the materials used in our existing products: www. Stick in fräsverktyget så långt som möjligt resp till markeringen på fräsens skaft i spännhylsan. [. . . ]