User manual FESTOOL KS 88 E

[. . . ] Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. D) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. [. . . ] The risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. ­ Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. ­ Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the workpiece by hand or against your body leaves it unstable and may lead to loss of control. The pictures for the functional description are on a fold-out page at the beginning of the instruction manual. When reading of the manual you can fold out this page for having always an overview of the machine. [1-1] [1-2] [1-3] [1-4] [1-5] [1-6] [1-7] [1-8] [1-9] [1-10] [1-11] Chip guard On/Off switch Variable speed trigger (only PSB 400 EBQ) Switch lock (only PSB 400 EBQ) Adjusting wheel for stroke speed control Swivel plug-it connection (only KS 88 E) Mains power cable Extractor connector Saw table change lever Saw blade ejection Replaceable saw table Jigsaws are designed for sawing wood and similar materials similar to wood. With the special saw blades offered by Festool, these machines can also be used for sawing plastic, steel, aluminium, nonferrous metal and ceramic plates. Festool electric power tools must only be installed on work tables provided by Festool for this purpose. Risk of injury, electric shock X Always pull the plug out of the socket before any type of work on the machine! Push the saw blade [5-4] into the opening as far as the stop with its teeth in cutting direction [52]. LIn the case of very short saw blades, it is advisable to remove the saw table (see chapter Changing saw table) before inserting the saw blade. Ejecting saw blade L When ejecting the saw blade, hold the electric power tool such that no persons or animals can be injured. If the saw blade is not ejected: run jigsaw 3 - 10 seconds at a high speed. Plasterboard) Damage to machine through dust penetration, risk of injury X Do not work overhead!When working, hold the electric power tool by the handle and guide it along the desired cutting line. For precise cuts and smooth running, use two hands to guide the electric power tool. Freely guided sawing along a scribe mark The triangular shape of the splinterguard [3-1] points to the cutting line of the saw blade. Risk of injury X With the tool switched off and unplugged, check for tight fit of the sawblade before starting to work X Always apply the pendulum jigsaw to the workpiece with the sawblade running. The tool can become entangled and lead to a loss of control of the power tool. [. . . ] During the second and third year of the warranty the customer is responsible for shipping the tool to Festool. Festool will pay for return shipping to the customer using UPS Ground Service. All warranty service is valid 3 years from the date of purchase on your receipt or invoice. Festool Limited Warranty This warranty is valid on the pre-condition that the tool is used and operated in compliance with the Festool operating instructions. [. . . ]