User manual FESTOOL CS 70 ST

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FESTOOL CS 70 ST. We hope that this FESTOOL CS 70 ST user guide will be useful to you.


FESTOOL CS 70 ST : Download the complete user guide (426 Ko)

Manual abstract: user guide FESTOOL CS 70 ST

Detailed instructions for use are in the User's Guide.

[. . . ] 1) Guide unit consisting of: 2 guide rods mounted on 2 supports with 2 legs 1 Open-end spanner size 17 1 Open-end spanner size 10 1 Allen key 5 mm 1 Adjusting bracket, front 4 Bolts M6x16 4 Washers Ø 6 4 Bolts M8 x 25 2 Fitting angle 4 Square nuts 1 Washer 4 mm thick (this washer is only needed as a compensating washer when extension tables and sliding table are fitted) 1 Adjusting bracket, rear Complete table, consisting of: aluminium profile plate with fitted roller supports with guide rollers and scraper Extra clamp for stop guide And support must lie against one another following assembly, do not tighten bolts yet. [. . . ] 9) each onto the front and rear of the table frame of the PRECISIO (Fig. 10) into the corresponding square hole beneath the saw table for the fastening bolt lying towards the middle of the table. The nut for the second fastening bolt is stuck to a strip as an assembly aid. Then remove strip and insert second nut into the rear opening and screw rear fitting angle in place. 2 Adjusting the table height A separate adjustment must be carried out at the front and rear support. If the sliding table is correctly adjusted the gap between the underside of the stop and the base table is the same across the whole width. 2 Adjusting the parallelism A separate adjustment is necessary at the front and rear supports. Set stop guide so that the front edge of the stop is exactly flush with the outer table edge of the PRECISIO. [. . . ] 2 Réglage de la hauteur de table Il convient d'effectuer le réglage nécessaire séparément sur le support avant et sur le support arrière. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE FESTOOL CS 70 ST




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FESTOOL CS 70 ST will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.