User manual FERGUSON F5000DAB

[. . . ] SAFETY INFORMATION Mains supply This equipment is designed to operate from a 230-240 Volt, 50Hz AC mains supply. Check that the rating label on the back of the equipment states AC 230V before you plug it in for the first time. [. . . ] Read these instructions carefully before you try to use the equipment. Avoid harsh conditions such as wet or damp places, high humidity, heavy vibration, extremely high or low temperatures, strong sunlight and places that are very dusty. To save power, switch off mains power or pull out the mains power plug when you are not using the equipment, unless the function of the equipment requires a continuous power supply. Don't continue to use this equipment if you have spilt liquids in it, if it is damaged in any way or if it does not work normally. Any other use may invalidate the guarantee and might be dangerous. Ventilation Place the equipment on a hard flat surface away from direct sunlight and heat sources. Don't obstruct the ventilation slots, including those underneath, with soft furnishings. Overheating will shorten the life of the equipment and increase the risk of fire. Cleaning Disconnect the mains supply and use only a lightly dampened soft cloth. Do not use aggressive cleaners or strong detergents as these may damage the cosmetic finish. Batteries Remove batteries when the equipment is not to be used for a long time. Batteries left in equipment may cause damage through deterioration and corrosive leakage, invalidating the guarantee. To protect the environment, please use local recycling facilities for battery disposal. Important Safety warnings To prevent electric shock, do not remove any cover. [. . . ] * The disc should be cleaned from the centre to the edge. FROM THE CENTRE TO THE EDGE CORRECT INCORRECT * Never use benzene, thinners, record cleaner fluid or antistatic spray. * Be sure to close the CD tray, so the lens is not contaminated by dust. UK-3 [. . . ]