User manual FENDER STAGE 112 SE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FENDER STAGE 112 SE. We hope that this FENDER STAGE 112 SE user guide will be useful to you.
 |
FENDER STAGE 112 SE : Download the complete user guide (685 Ko) |
Manual abstract: user guide FENDER STAGE 112 SE
Detailed instructions for use are in the User's Guide.
[. . . ] The DRIVE Channel features GAIN, VOLUME, and a separate EQ consisting of CONTOUR, TREBLE, and BASS controls. The almost unlimited combinations of the GAIN and CONTOUR controls will vary your sound from smooth and bluesy to a honky bite or all the way to ten for the crunchiest sounds around. [. . . ] TREBLE - Adjusts the amount of high frequency boost or cut in the NORMAL channel. MID - Adjusts the amount of mid frequency boost or cut in the NORMAL channel. MID SHIFT - When this button is depressed, it moves the frequency center of the NORMAL channel MID control up an octave. The tonal effect is a slight increase in bass response and a slight reduction of upper mids for a cleaner sound. BASS - Adjusts the amount of low frequency boost or cut in the NORMAL channel. Lower settings provide a gradual compression distortion, while higher settings provide more sustain. This control works in conjunction with the DRIVE channel VOLUME control (item 0) to set the overall volume of the DRIVE channel. A higher setting will notch the midrange to produce the "crunch" sound characteristic in most heavy metal music.
L. TREBLE - Adjusts the amount of high frequency boost or cut in the DRIVE channel. This control is post distortion and is useful in adjusting the distortion characteristic from smooth to brash. BASS - Adjusts the amount of low frequency boost or cut in the DRIVE channel. This control is post distortion and is useful for adjusting the amount of "thump" or "chunk" produced by the DRIVE channel. DRIVE SELECT - When this button is depressed, the amp switches from the NORMAL channel to the DRIVE channel. NOTE: Depressing this switch disables the CHANNEL SELECT footswitch button. [. . . ] ) ) ) )
DIMENSIONS:
POWER OUTPUT: INPUT IMPEDANCE:
160 Watts R. M. S. Input 1: Input 2: Preamp Output Impedance: Power Amp Input Impedance: Power Amp Sensitivity: 850k ohms 66k ohms 1k ohms 10k ohms 1. 4V for clipping
EFFECTS LOOP:
LINE OUTPUT: POWER REQUIREMENT:
-3 dBV into 600 ohms (minimum). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE FENDER STAGE 112 SE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FENDER STAGE 112 SE will begin.