User manual FENDER PRINCETON 112 PLUS
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FENDER PRINCETON 112 PLUS. We hope that this FENDER PRINCETON 112 PLUS user guide will be useful to you.
 |
FENDER PRINCETON 112 PLUS : Download the complete user guide (531 Ko) |
Manual abstract: user guide FENDER PRINCETON 112 PLUS
Detailed instructions for use are in the User's Guide.
[. . . ] The DRIVE channel also incorporates Fender's innovative 11 smooth clipping" circuit. This circuit concept is designed to simulate the way tubes clip and produce the overdrive distortion sound so popular with musicians today. [. . . ] This control works in conjunction with the DRIVE VOLUME control (item L) to set the overall loudness of the Drive Channel. DRIVE CHANNEL INDICATOR -This LED is illuminated when the Drive Channel is active. CONTOUR - Adjusts the overall tone quality of the Drive Channel without affecting the signal level. Low CONTOUR settings will provide emphasis in the midrange frequencies whereas a higher setting will notch the midrange to produce sounds characteristics of most "metal" music. TREBLE - Adjusts the amount of boost or cut in the high frequency range of the Drive Channel.
M. REVERB - Adjusts the amount of reverb signal mixed with the original dry signal for both the Normal and Drive Channels. FOOTSWITCH - Plug in connection for the optional footswitch to select between the Normal and Drive Channels and to switch the Reverb on and off. For proper operation of the footswitch, the DRIVE SELECT switch (item K) should be out. NOTE: Any good quality patch cable will work with the remote footswitch, however, a speaker grade cord is preferable to a coax guitar cable if it is availability. PREAMP OUT - This jack provides an unbalanced output signal from the preamp and can be used in conjunction with the POWER AMP IN jack (item P) as a patch point for effects units (i. e. [. . . ] M. S.
INPUT IMPEDANCE: NOMINAL INPUT LEVEL: POWER OUTPUT:
RATED LOAD IMPEDANCE: 8 EFFECTS LOOP: Nominal Level- -10 dBV Output Impedance- 1k. Input Impedance 16k VERSION: VERSION: VERSION: VERSION: 100V 120V 230V 240V AC AC AC AC 50/60 Hz. , 180W 60 Hz. , 180W 50 Hz. , 180W 50 Hz. , 180W
POWER REQUIREMENTS: 100V 120V 230V 240V
SPEAKER COMPLEMENT: One 8 Special Design 12" Speaker (P/N 025923) DIMENSIONS: Height: 16-1/2" (41. 9cm) Width: 18-5/8" (47. 3cm) Depth: 9" (22. 9cm) 28 lbs. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE FENDER PRINCETON 112 PLUS
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FENDER PRINCETON 112 PLUS will begin.