User manual FENDER POWER STAGE 100

[. . . ] We are sure you will find the PowerStage 100 to be both a unique and effective sound reinforcement product, providing years of trouble-free service. Enclosed in a quasi-trapezoidal floor monitor style cabinet, the PowerStage 100 includes a 3 channel preamp, a power amp, a power supply and a fullrange coaxial speaker system. With three angles of orientation, inputs for microphones and a variety of musical instruments, the PowerStage 100 is suitable for nearly every monitoring application. The PowerStage 100 also features a unique detachable wired remote control panel. [. . . ] MIC 2 IN - An additional balanced microphone input for the PowerStage 100. Both the MIC 2 IN and the INST jack can be used simultaneously, however, any adjustments to the MIC 2 / INST control knob will affect the volume of both the Mic 2 and Instrument inputs. LINE - A 1/4 inch TRS balanced input jack suited for use with items having a line level output. Both the AUX LINE and the STEREO jack can be used LINE simultaneously but remember, any adjustments to the AUX LINE / STEREO LINE control knob will affect the volume of both the AUX LINE / STEREO LINE inputs. PHANTOM POWER LED - This LED illuminates when the phantom power supply is on. A F G G. MIC 1 OUT - This three pin XLR balanced male output connector is used to send the MIC 1 input signal unmodified out to a mixing console. INST - A 1/4 inch TS unbalanced input jack suited for use with instrument level signals such as an acoustic guitar, a keyboard or a drum machine. Remember, any adjustments to the MIC 2 / INST control knob will affect the volume of both the Mic 2 and Instrument inputs. STEREO LINE - These are unbalanced phono (RCA) input jacks designed for use with a stereo tape player, CD player, etc. These jacks produce a mono signal out and are useful for playing prerecorded music. Adjustments to the AUX LINE/STEREO LINE control knob will affect the volume of both the AUX LINE / STEREO LINE inputs. LINE OUTPUT - A 1/4 inch TRS unbalanced output jack designed to feed the optional PowerStage Xpander 100. B H C I D J E K E. INSERT - A 1/4 inch unbalanced TRS input / output phone jack designed for use with signal processing devices, such as a digital delay or a reverb unit. A special "Y" line cord (stereo to 2 mono) is required to use this jack. On the PowerStage 100, the tip is the send and the ring is the return. POWER SECTION L L. This is a grounding type supply cord to reduce the possibility of shock hazard. DO NOT ALTER THE AC PLUG. M M. POWER SWITCH - Turns the AC power ON and OFF. When the switch is in the OFF position, the PowerStage 100 is completely shut down. 5 WIRING AND CONNECTIONS The PowerStage 100 utilizes a variety of connectors on its input panel. [. . . ] · If using an effects processor, is the "Y" line cord properly connected?Remember, turning up the Mic 2 / Inst volume WILL NOT affect the output of the main P. A. It WILL determine how much of your "dry" signal you will hear. MINI PA SET UP (A ONE PERSON BAND) 1. Connect your microphone to the Mic 1 In jack, your instrument to the Inst jack and a tape or CD player to the Stereo Line jack. [. . . ]