User manual FENDER PASSPORT DC-DC CONVERTER

[. . . ] Your Fender Passport DC/DC Converter comes complete with: · A "gig bag" for convenient storage and transportation, · Two (2) 10 amp fuses for installation into the Passport Power Tower (be sure to note the values and type of these fuses for future reference) and · an Owner's / Instruction Manual. In order to thoroughly understand the use and features of your Passport sound system, please read and adhere to all safety warnings on both the Passport DC/DC Converter and the Passport Portable Sound System. Warnings: Read and observe the warning labels, cautions and instructions supplied by battery manufacturer. [. . . ] 3) Take a minute to ensure you have clearly identified the respective Positive and Negative terminals of the battery. These may be color coded RED (positive) and BLACK (negative) or simply identified by + and - marks. 4) Now, connect the BLACK - negative battery alligator clip of the DC/DC Converter to the NEGATIVE (-) terminal of the battery and the RED positive battery alligator clip to the POSITIVE (+) terminal of the battery. Make sure a secure and proper contact is made with the alligator clips. If a clip accidentally comes off during use of the Passport, make sure to turn off the DC/DC Converter before re-connecting to the battery. Failure to do so could damage both the DC/DC Converter unit and the Passport unit. Turn on the power switch on the DC/DC Converter only after reconnecting the clips. You are now ready to turn on the DC/DC Converter and with it the Passport system. Important: The front panel Power Switch on the Passport Portable Sound System is now inoperative and has no effect on the On/Off status of the Passport Portable Sound System. The Power supply switch function is now controlled by the On/Off switch on the DC/DC Converter. Battery life may differ according to a number of variables including: Battery condition Battery charge state Temperature Program type and continuity Passport Control settings FYI When using any electronic equipment after transportation in cold weather or whenever the equipment is appreciably colder than the room in which it will be operated, condensation may form on external and internal surfaces. This can result in short circuits, damage to the equipment and possibly exposing humans to risk of electrical shock!Always allow sufficient time for equipment to reach ambient temperature and for any condensation to evaporate BEFORE plugging in or otherwise connecting to power. This is true for all electrical equipment! If possible, use a new or as new battery and always fully charge the battery before use. Your own specific circumstances and applications will dictate larger or smaller batteries. [. . . ] FYI: It is NOT necessary to remove these fuses when operating the Passport via an AC power current. CARE AND CLEANING To clean your Passport DC/DC Converter, use only a damp cloth to wipe the surface of a disconnected DC/DC Converter. Avoid exposure to running water and condensation. SPECIFICATIONS Input voltage: 12v nominal 40A, Auto Blade 10A, Auto Blade 6 lb. (2. 74 kg) BATTERY LIFE AND SUGGESTIONS In the interests of extending useable/maximum battery life, the DC/DC Converter has been designed to provide the Passport with sufficient voltage to reach its specified peak power output for musical and program transient. [. . . ]