User manual FENDER JAZZMASTER ULTRALIGHT 112 ENCLOSURE

[. . . ] [. . . ] Please read these instructions and your amplifier manual before making connections. SPECIFICATIONS PART NUMBER SPEAKER 2277700000 One 12" (30. 5 cm) steel frame driver 2" (5. 1 cm) voice coil Neodymium magnet 5/8" (1. 6 cm) Italian Poplar plywood 98. 5 dB, 1 Watt - 1 Meter 250 Watts 2 ohms 4-Pole Speakon® Connector using Pins 1+ and 1­ VB = 0. 8 ft3 (38. 7 L) 15 1/4 in 15 1/4 in 10 1/4 in 16 lb (7. 3 kg) (38. 7 cm) (38. 7 cm) (26. 0 cm) Ultralight Connections To connect the JazzmasterTM Ultralight speaker to an Ultralight amplifier, use the Speakon® cable included with the amplifier. Rotate the Speakon® connector to align it with the input slots, then fully insert the connector. CABINET SENSITIVITY POWER HANDLING IMPEDANCE CONNECTIONS ENCLOSURE VOLUME DIMENSIONS Height: Width: Depth: WEIGHT Disconnecting Slide the locking tab back on the connector while rotating the connector counter-clockwise. Pull the connector out from the input socket. Non-Speakon® Connections If your amplifier does not have a Speakon® speaker output, you will need the appropriate speaker cable or adapter to connect the JazzmasterTM Ultralight loudspeaker. [. . . ] [. . . ]