User manual FENDER CYBER-TWIN

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FENDER CYBER-TWIN. We hope that this FENDER CYBER-TWIN user guide will be useful to you.


FENDER CYBER-TWIN : Download the complete user guide (1816 Ko)

You may also download the following manuals related to this product:

   FENDER CYBER-TWIN (3142 ko)
   FENDER CYBER-TWIN (3176 ko)
   FENDER CYBER-TWIN (2960 ko)
   FENDER CYBER-TWIN (996 ko)

Manual abstract: user guide FENDER CYBER-TWIN

Detailed instructions for use are in the User's Guide.

[. . . ] CORONA, CA USA Copyright 2000 by FMIC Trademarks Fender, Cyber-Twin, Virtual Tone Interpolation, "Better Tone Through Cybernetics", "Innovate. . . Don't Emulate", the Fender logo, the Cyber-Twin logo, the VTI logo, the Fender "F" DSP logo, `59 Bassman, Bassman, Pro Amp, Prosonic, Dyna-Touch, Hot Rod, Twin Amp, Twin Reverb, Super Reverb, Deluxe Reverb, Deluxe, Champ, Vibro-Champ, Vibro-King, Vibrolux Reverb, Tremolux, Bandmaster, Ultimate Chorus, Princeton Chorus, Princeton Reverb, Sidekick, Stage, Sunn, Telecaster and Stratocaster are trademarks or registered trademarks of FMIC. All other trademarks are property of their respective owners. 1 This symbol warns the user of dangerous voltage levels localized within the enclosure. This symbol advises the user to read all accompanying literature for safe operation of the unit. WARNINGS: TO PREVENT DAMAGE, FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CONNECT TO AN AC POWER SUPPLY IN ACCORDANCE WITH THE VOLTAGE AND FREQUENCY RATINGS AS SHOWN ON THE REAR PANEL OF THE UNIT. [. . . ] With the Ramp setting, the echo time change will be gradual with an analog sounding pitch warble, (audible until the delay time stabilizes). With the Step setting, the echo time change will be instant with a "digital zip" sound audible for a moment. [ [ [ [ [ [ [ [ ~~ ~~ ~~ ~ ~~ ~~ ~~ ~~ ~~ ~~ ~ ~~ ~~ ~~ ~~ ~~ ~~ ~ ~~ ~~ ~~ ~~ ~~ ~~ ~ ~~ ~~ ~~ ~~ ~~ Stereo chorus effects with sine-wave or triangle-wave delay modulation. The sine-wave version tends to sound more swirly, while the triangle-wave variety is subjectively more even-sounding. The increment of change gradually increases from 0. 01 Hz for the slowest rate to 0. 08 Hz for the fastest rate. Remember that the TAP button can always be used to key in the chorus rate by feel two TAPs set the time it takes for the chorus LFOs (Low Frequency Oscillators) to go through one cycle. Note: Although this is a stereo chorus, both of the chorus voices move at the same rate. Adjusts the amount of Doppler shift and how apparent the effect sounds. Select between 1. 0 for no apparent effect and 10. 0 for maximum effect. Select 1. 0 for a transparent natural sound and 10. 0 for a synthesized sound with a noticeable delay between the original and chorus signals. Adjusts the phase relationship between the two chorus Low Frequency Oscillators. Select 1. 0 and the two voices of the chorus are in phase and the effect is minimal. Select 10. 0 and the LFOs are out-of-phase and the maximum stereo effect is achieved. For Sine Chorus, this control is usually set at 5. 5 for the ideal sound. For Triangle Chorus, this control is often set 10. 0 for the best sound. 35 Description Stereo flange effects with sine-wave or triangle-wave delay modulation. Just as in the chorus effects, the sine-wave flange tends to have more "swirl, " while the triangle-wave version is more transparent. The increment of change gradually increases from 0. 01 Hz for the slowest rate to 0. 08 Hz for the fastest rate. Remember that the TAP button can always be used to key in the flange rate by feel two TAPs set the time it takes for the flange LFOs to go through one cycle. Remember that although this is a stereo flange, both of the flange voices move at the same rate. Adjusts the amount of Doppler shift and how apparent the effect sounds. Select between 1. 0 for no apparent effect and 10. 0 for maximum effect. Adjusts how much signal from the flange taps is recycled back to the input. Select between 1. 0 for minimum levels that result in chorus-like sounds and 10. 0 for maximum flanging. [. . . ] The upper nibble identifies the Cyber-Twin and the lower nibble is the software version Function ID number. Packet Number Data bytes: The data bytes have been formatted following the MIDI Specification 1. 0 Checksum byte used for error checking End of System Exclusive Message System Exclusive End of File Message Description Start of System Exclusive Message Fender's Manufacturer ID nn = Device ID (minus one) Amp ID number 11H: The upper nibble identifies the Cyber-Twin and the lower nibble is the software version Function ID number. See list for values End of System Exclusive File Byte End of System Exclusive Message V HFL G QH SS $ 58 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . If no hand shake is received then the amp will transmit the first data packet. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE FENDER CYBER-TWIN




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FENDER CYBER-TWIN will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.