User manual FENDER CONCERT

[. . . ] The ST-75's dual diameter mounting pole features both 1 3/8" and 1. 5" (35 mm & 38 mm) diameters and makes a great accessory for the Fender Artist Series or SPL Series 1211 Mk-II and 1225 Mk-II loudspeaker systems. [. . . ] Because loudspeaker enclosures placed on the ST-75 could be damaged or cause bodily harm if they fall, please read through these instructions and heed all caution and safety warnings. 4 Turn tripod upright and slide leg fitting to adjust the width of the leg spread until the cross bars are parallel to the floor. This will ensure the ST-75 is at its maximum footprint (Using a smaller footprint will adversely affect the stability of the unit). Re-tighten handknob and check the stability of the unit at the desired height setting. Remember to secure all wires coming from the ST-75 for reasons of both safety and good presentation (loose wires can be tripped on and give a cluttered, unprofessional appearance). Tighten collar handknob REMEMBER . . . 3 Turn tripod upside down and pivot legs out. Check to ensure that all handknobs are secure when supporting equipment. [. . . ] Check to ensure that all handknobs are secure when supporting equipment. [. . . ]