User manual FENDER ACOUSTASONIC ULTRALIGHT STEREO DATASHEET

[. . . ] [. . . ] Please read these instructions and your amplifier manual before making connections. SPECIFICATIONS PART NUMBER SPEAKERS 2271700000 Two 8" (20. 3 cm) drivers with 2" (5. 1 cm) voice coils and Neodymium magnets; Two 1" (2. 5 cm) soft dome tweeters with Neodymium magnets CROSSOVER 3kHz, 12dB/octave low-pass filter, 18dB/octave high-pass filter, using metallized polyester film capacitors and low loss inductors 5/8" (1. 6 cm) Italian poplar plywood 91 dB, 1 watt - 1 meter 125 watts per side 4 ohms per side 4-Pole Speakon® connector Ultralight Connections To connect the AcoustasonicTM Ultralight speaker to an Ultralight amplifier, use the Speakon® cable included with the amplifier. Rotate the Speakon® connector to align it with the input slots, then fully insert the connector. Rotate the connector clockwise until it locks into place. CABINET SENSITIVITY POWER HANDLING IMPEDANCE CONNECTIONS DIMENSIONS Disconnecting Slide the locking tab back on the connector while rotating the connector counter-clockwise. Pull the connector out from the input socket. ENCLOSURE VOLUME VB = 0. 43 ft3 (12 L) per side Height: 15 in (38. 1 cm) Width: 20. 25 in (51. 4 cm) Depth: 10 in (25. 4 cm) WEIGHT 22 lb (10. 0 kg) Non-Speakon® Connections If your amplifier does not have a Speakon® speaker output, you will need the appropriate speaker cable or adapter to connect the AcoustasonicTM Ultralight loudspeaker. [. . . ] [. . . ]