User manual FENDER 3106

[. . . ] The almost unlimited combination of the gain and tone controls will vary your sound from smooth and bluesy to driving rock or all the way to "12" for the gnarliest shred imaginable (Yes, the knobs go to "12"!). The external speaker jack automatically mutes the internal speaker while driving any external 8 ohm enclosure. [. . . ] The external speaker jack automatically mutes the internal speaker while driving any external 8 ohm enclosure. Try plugging into a 4-12 cabinet and watch the BRONCO take on an entirely new attitude!The HEADPHONE jack automatically mutes the speaker while driving stereo or mono headphones or may be used as a low level line out for direct connection to recording equipment. Last but definitely not least, the BRONCO packs a new power amp based on a radically underdamped design that interacts with the speaker in much the same way as a tube amplifier does, producing sparkle and punch with an increase in apparent loudness and power that defies comparison to other similarly rated units. Also included is a sophisticated, transparent protection scheme designed to prevent amplifier failure due to bad speaker cords or incorrectly connected speaker jacks. The BRONCO's compact size, great tone, versatile features, and all around handsome appearance make it the perfect amplifier for practice, backstage warm-up, and home recording. HEADPHONES -- This jack provides an output to standard stereo or mono headphones for private listening. CAUTION: Prolonged listening at high levels may be hazardous to your hearing!This jack can also be used as an unbalanced line output by using either a stereo or mono 1/4 inch phone plug connection. EXTERNAL SPEAKER ­­ This jack provides an output to an external speaker enclosure. E. F. L. G. LINE CORD ­­ This amplifier is equipped with a grounding type supply cord to reduce the possibility of shock hazard. SPEAKER Bronco Specifications PART NUMBER: 120V VERSION: 22-3104 230V VERSION: 22-3164 INPUT IMPEDANCE: NOMINAL INPUT LEVEL: POWER OUTPUT: RATED LOAD IMPEDANCE: POWER REQUIREMENTS: Greater than 1 Meg Ohm 100 mV 15 Watts R. M. S. [. . . ] E. F. L. G. LINE CORD ­­ This amplifier is equipped with a grounding type supply cord to reduce the possibility of shock hazard. SPEAKER Bronco Specifications PART NUMBER: 120V VERSION: 22-3104 230V VERSION: 22-3164 INPUT IMPEDANCE: NOMINAL INPUT LEVEL: POWER OUTPUT: RATED LOAD IMPEDANCE: POWER REQUIREMENTS: Greater than 1 Meg Ohm 100 mV 15 Watts R. M. S. [. . . ]