User manual FELLOWES TITAN 125

[. . . ] DO NOT laminate with self-adhesive pouches (which require a cold setting). DO NOT use sharp objects to clean laminator. 4 LAMINATOR CONTROLS A B C D E F Easy-Access opening cover Adjustable document entry guide Entry support shelf Reverse button Standby button LED user interface G H I J K L Selection buttons (up/down/left/right) Select / OK button Detachable document exit tray On/off switch (at rear) Carry points (at sides) Ready LED FEATURES & TIPS TitanTM operates at a fixed temperature. The user only needs to select the required pouch setting before laminating. There is no need to wait for the machine to warm-up or cool-down when switching between thick or thin pouch settings. [. . . ] Please read these instructions before use. · · SAFE TO TOUCH · 5 SETTING UP THE LAMINATOR 1. Place the machine on a stable surface. Ensure enough clear space behind the machine to allow items to pass through freely. 4. Plug the machine into an easily accessible main socket. 2. To fully support pouches and items of different sizes use the adjustable entry guide to center the item before laminating. Place exit tray onto the rear of the machine. STEPS TO LAMINATE 5. 6. Switch the power on (Power switch located at the rear of the machine). and ready LED's will flash for 5 seconds before automatically selecting the 3 Mil. The LED interface allows selection of these functions: - 3, 4, 5, 7, 10 Mil. pouch settings - Manual laminating - Reverse - `Easy-Access' for cleaning and maintenance. The laminator will automatically select the thinnest pouch setting (3 Mil. ) within 5 seconds of power-on unless another setting is selected. During warm-up or cool-down, the selected pouch setting will flash red. When the laminator has reached the chosen setting, the LED will stop flashing and glow red. The machine will sound 2 short alerts. 9. Place item into open pouch. Keep the pouch straight and centered within the document entry, not on an angle. To reverse the laminating process at any stage, press and hold the `Reverse' button to eject the item. The laminator will sound alerts continuously and the ready LED will flash. 10. 11. 7. 12. 8. NEED HELP? Let our experts help you with a solution. Customer Service: www. fellowes. com Always call Fellowes before contacting your place of purchase. See back cover for useful telephone numbers. 6 MAINTENANCE - Easy-AccessTM The TitanTM laminator can be opened manually by selecting the `open' setting ( ) on the control panel. Please note: the power supply and the machine must both be ON to release the electronic safety catch. Select the `open' setting ( ) using the navigation buttons on the control panel. [. . . ] The duration, terms and conditions of this warranty are valid worldwide, except where different limitations, restrictions or conditions may be required by local law. For more details or to obtain services under this warranty, please contact Fellowes or your dealer. PRODUCT REGISTRATION Thank you for purchasing a Fellowes product. Please visit www. fellowes. com/register to register your product and benefit from product news, feedback and offers. Product details can be found listed on the rating plate positioned on the rear side or underside of the machine. STORAGE & EXTERNAL CLEANING Unplug the machine at the wall. [. . . ]