User manual FELLOWES POWER TRIM

[. . . ] Contact Customer Service if you have any questions. PRODUCT REGISTRATION Thank you for purchasing a Fellowes product. Please visit www. fellowes. com/register to register your product and benefit from product news, feedback and offers. Product details can be found listed on the rating plate positioned on the rear side or underside of the machine. NEED HELP? Let our experts help you with a solution. [. . . ] The duration, terms and conditions of this warranty are valid worldwide, except where different limitations, restrictions or conditions may be required by local law. For more details or to obtain services under this warranty, please contact Fellowes or your dealer. 5 BEFORE TRIMMING 1. Ensure the machine is on a stable surface. Check that there is enough clear space behind the machine to allow trimmed items to pass through freely. 2. Use the document gauge at the sides of the cutting base to check that items do not exceed maximum capacity. Use transparent window with orange trimline guide to quickly and accurately align your cuts. For best results, mark the exact cut position on the item before trimming and try trimming a test sheet. Alternatively, align item with the cut dimensions on the base of the trimmer. Secure document with SafeCutTM Clamp, the CutControl LED touch pad will light up blue. 9. When touched, the Cut-Control LED will light up in pink and then turn flashing blue when it is cutting. PowerTrim will complete 3 cut cycles (of 6 cuts) for cutting max 30 sheets (20lb). Release clamping mechanism again before removing items from cutting bed. 7. Remove SafeCutTM Guard (magnetic catch). Unscrew the 2 cross head screws on either side of the cutter blade unit (Phillips type screwdriver). Remove the cutter blade unit by pulling the button on the blade unit. Re-secure SafeCutTM Guard. CHANGING CUTTING STRIPS Unplug PowerTrim. Remove SafeCutTM Guard (magnetic catch). Make sure SafeCutTM Clamp is open. Rotate small safety catches to release the cutting strip. When all areas have been used, replace cutting strip with new one from accessory pack (#54125). Re-secure cutting strip and SafeCutTM Guard again. REPLACEMENT ACCESSORIES The following replacement parts are available for PowerTrim as a combined accessory pack (#54125): Item 1 blade unit 2 cutting strips Required After 2000 cuts After 500 cuts 7 TROUBLESHOOTING AND LED INDICATORS Status Scissor icon is ON. Base LED lights are OFF Scissor icon is PINK + beep sound Possible Cause Ready to trim (clamped down and all covers closed) SafeCut Clamp is open No power SafeCut Guard is open Touched scissor icon Solution Insert item and close SafeCut Clamp Turn on main supply and switch on machine Ensure SafeCut Guard is correctly closed Touch scissor icon. Check SafeCut Clamp is closed and SafeCut Guard is correctly closed Machine must cool for 30 minutes (minimum) Flip cutting strip and use reverse side. [. . . ] · Consult the dealer or an experienced radio/TV technician for help. CANADA CLASS B NOTICE - AVIS CANADA, CLASSE B This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. [. . . ]