User manual FELLOWES MICRO TRAC

[. . . ] Turn on the power to your computer d. Follow the instruction on your computer, the correct driver will be automatically installed 2. For installation on a USB port: (Windows 98 or higher required) a. Plug the Micro Trac cable into an open USB port or external USB hub (if applicable). It is not necessary to turn off your computer for this operation. SOFTWARE REQUIRMENTS: The Fellowes Micro Trac is a plug and play device that requires no additional software. [. . . ] Check the IRQ/address settings of these devices for conflicts, and change the settings as required. 2. The main button or trigger button is the Micro Trac enter key and allows for the placement of the cursor in order to perform functions such as drag and highlight. Make sure that the BIOS setting on the connected port of your computer shows Enable. Refer to your computer documentation for the correct port configuration. The cursor / trackball does not move smoothly Remove the Trackball inset ring. The cursor moves only a small distance when the Trackball is moved Open the "Control Panel" from "My Computer". Select the mouse icon and proceed to the "Motion" tab, within the motion tab adjust the "Pointer Speed" and/or "Acceleration" to a faster level. FEDERAL COMMUNICATIONS COMMISSION (FCC) NOTICE: This device complies with Part 15 of the FCC Rules. This device must accept any interference received, including interference that may cause undesired operation This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installations, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Connect the equipment into an outlet on a circuit different from that the receiver is connected. Consult the dealer or an experienced radio / TV technician for help. FELLOWES CUSTOMER SERVICE: Our technical support representatives are readily available to help you with your problems. We will do our best to resolve the issue, or we will offer you full support in your decision to obtain a refund (please keep a copy of your dated sales receipt as proof of purchase). For technical support call 1-888-FEL-TECH or email at: www. feltech@fellowes. com. For questions about the warranty or functionality of this product, call 1-800-945-4545 or email www. fellowes. com. CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. DISCLAIMER: The following does not apply to any country where such provisions are inconsistent with the local law: Fellowes Inc. [. . . ] To obtain service under this warranty on products purchased in the USA, return the machine prepaid to the address found in the Operating Instructions. Return with product: · Copy of original sales receipt · A card stating your name, address, daytime telephone number, product model and serial number, plus a brief description of the problem For specific instructions on obtaining service under this warranty on products purchased outside the USA, contact the appropriate listed on the back of the Operating Instructions. Warrantor: Fellowes Manufacturing Company LIMITED WARRANTY: Fellowes Inc. [. . . ]