User manual FELLOWES GXL 125

[. . . ] Do not insert anything in the throat opening of the machine other than carriers with pouches/documents. Do not attempt to remove jammed materials by poking objects into the laminator and particularly do not insert any metal objects such as a letter opener, knife, scissors, paper clips etc. , into the laminator. Opening/removing covers may expose you to dangerous voltage points or other risks, and may void manufacturer's warranty. [. . . ] Before turning power switch on, verify that the Foam Board\Pouch Selector is positioned correctly in the "Foam Board" location. Turn power on by positioning On/Off switch in the "Heat Only" location. This will allow the machine to pre-heat without engaging the laminating rollers. NOTE: During first usage, a small white puff of smoke may appear which is common to a new laminator. Place item to be laminated onto a Fellowes' foam board by raising laminate cover sheet and inserting document. Center the item for an even border; a border of approximately 1/8" to 1/4" is recommended. Initiate laminating rollers by moving selector to "Heat and Rollers" setting. Insert the foam board, sealed edge first, slowly into the front loading area of the laminator until it engages with the machine. For best results, feed foam board with item to be laminated facing top. The finished laminated item will automatically exit at the rear of the machine. After the foam board has stopped moving, place it on a flat surface and allow to cool for one minute. Turn the laminator off and unplug after completion of usage. For Use With Hot Pouches 1. Before turning power switch on, verify that the Foam Board\Pouch Selector is positioned correctly in the "Pouch" location. Turn power on by positioning On/Off switch in the "Heat Only" location. This will allow the machine to pre-heat without engaging the laminating rollers. NOTE: During first usage, a small white puff of smoke may appear which is common to a new laminator. [. . . ] In no event shall Fellowes be liable for any consequential or incidental damages attributable to this product. To obtain service under this warranty on machines purchased in the USA, return the machine prepaid to the address below. · A card stating your name, address, daytime telephone number, machine model and serial number, plus a brief description of the problem. [. . . ]