User manual FELLOWES ERGO TECH CORDLESS

[. . . ] The input device will not function properly without installation of the Fellowes Easy Point software. The device will work as a basic mouse as soon as you plug it in, but to make full use of the device, you must install the software. The Fellowes Easy Point software is programmed to Auto Run, however if this function is disabled in your computer please follow the steps outlined on the next page: 1. Choose the "Start" menu (Ctrl & Esc) and select "Run" 2. [. . . ] Check the IRQ/address settings of these devices for conflicts, and change the settings as required. · If using as a PS/2 mouse: Make sure that the BIOS setting on the connect port of your computer shows Enable. The screen cursor does not track well or the cursor does not move: · Remove the mouse ball inset ring. · Orientation of the receiver: Make sure the receiver is placed as close to the mouse as possible. Objects such as computer monitors, metal cabinets, other 27 Mhz devices can interfere with this product. If you can see the LED on the receiver, you should be able to see it blink when the mouse is moved or a button is pressed. This feature should help to determine the correct location for your environment. · Change the channel ID the device is using by following the instructions contained in this manual. The cursor moves uncontrollably around the screen, files may open and other unexplained occurances: · There is a conflict with drivers and/or devices. Please remove all other drivers or devices until the problem is resolved. · Use the other port type (USB or PS/2) to resolve the conflict. 8 FELLOWES CUSTOMER SERVICE Our technical support representatives are readily available to help you with your problems. We will do our best to resolve the issue, or we will offer you full support in your decision to obtain a refund (please keep a copy of your dated sales receipt as proof of purchase). For technical support call 1-888-FEL-TECH or email at: www. feltech@fellowes. com. For questions about the warranty or functionality of this product, call 1-800-945-4545. 9 SOFTWARE LICENSE AGREEMENT The enclosed software is being licensed to the original purchaser only on the condition that all of the terms contained in this license agreement are accepted. This is a legal agreement between the original purchaser and Fellowes. By opening the product package the purchaser agrees to be bound by the terms and conditions of the agreement. If these terms are not accepted, promptly return the software and all other items that are part of this product in their original package with the original receipt to the point of purchase for a full refund. Fellowes and its suppliers offer a nonexclusive license for use of one (1) copy of the enclosed software package ("Fellowes Easy Point Driver") on one (1) computer only with the Fellowes mouse you have purchased. You may make one (1) copy of the software for backup purposes only; this copy must be labeled with all copyright and other notices included on the software as supplied by Fellowes. Installation onto a network server for the purpose of internal distribution of the software is permitted only if each user has purchased an individual software package for each computer to which the software is distributed. User shall not decompile, disassemble or modify the software in any way. User may not transfer the software using any means (except as expressly permitted above). User may not transfer the software or Fellowes input product except upon permanent transfer, provided user does not retain a copy of the software, and provided transferee agrees to be bound by the terms and conditions of this license. [. . . ] makes no warranties with respect to this documentation, whether expressed or implied. This includes, but is not limited to, any implied warranties of merchantability and fitness for a particular purpose. The information covered in this document is subject to change without notice. assumes no responsibility for any errors that may appear in this document. [. . . ]