User manual FAYTECH FT 1900

[. . . ] tHIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES , EXPRESSED OR IMPLIED , INCLUDING WITHOUT LIMITATION THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. All claims under warranty must be made promptly after occurrence of circumstances giving rise thereto and must be received within the applicable warranty period by faytech or its authorized representative. Such claims should include the Product type and serial numbers and a full description of the circumstances giving rise to the claim. Before any Products are returned for repair and/or adjustment, written authorization from faytech or its authorized representative for the return and instructions as to how and where these Products should be shipped must be obtained. [. . . ] Position: To move the position of the menu to the left (-) or the right (+). Menu Timeout: Determines how many seconds the OSD menu is displayed before it is automatically switched off, if there are no more operations. You can also select "off" to remove the OSD menu from the screen. Settings Reset: This option will return the display back to the factory settings. Use the Explorer on the CD and select the appropriate subdirectory (Touch Driver, then the right operation system) to open the installation file setup. Now you will see the following window: Select the Windows driver 2000/XP/Vista/Windows7 in the upper right. if a security warning pops up , click "Run" , "Continue" or "Execute". Under Vista you must confirm the UserAccount Control with "Continue". Some further warnings may be given depending on installed security programs. To complete the installation with all default options, click "Next" on each of the following dialog boxes. To switch back to a previous step, click the "<back" button. For a better understanding of this setting, try it with the Draw Test application under the Tools tab. Click on release without moving cursor: The cursor does not move to the touch position except at the lift-off point. For a better understanding of this setting, try it with the Draw Test application under the Tools tab. The following options are available for the faytech display in this submenu: If the difference is smaller than the defined area, the driver does not generate any mouse movement which helps reduce system load. Press this button and a new pop up window will be popped up on the monitor (see below). Touch or drag your touch pen or finger on this grid to gauge the effectiveness of the settings and calibrations that you have made. If you are using your finger, you may have to press firmly to draw continuous lines. Display-Multi-MonitorSetting tab: If you selected "Support Multi-Monitor System" when you installed the Touch driver, you will see a Display tab when you run the Touchkit Configure utility. you can have up to four faytech touch-screens connected simultaneously. In the example below, the touch-screen is display "1", while the second display "2" is a normal monitor. Both have the same resolution, but the touch screen is the primary monitor. [. . . ] Try to start with this resolution then experiment with other resolutions and other combinations of displays to see which work best for you. In this situation your display may be black at first if you configure it as an extended desktop. Tip: It is often best to use the display at the following resolutions: 7" 800x480 or 800x600, 8" 800x600, 10" 1024x768, all at 60Hz. If the display is used as a second display with a PC, which is already connected to a display with a much higher resolution, configure resolution profiles. [. . . ]