User manual F-SECURE MESSAGING SECURITY GATEWAY INSTALLATION GUIDE

[. . . ] This guide describes how to set up and configure the F-Secure Messaging Security Gateway appliance in a basic Microsoft Exchange e-mail server environment. F-Secure Corporation | Tammasaarenkatu 7 | PL 24 | 00180 Helsinki | Finland | Tel. [. . . ] Please use characters which can be accessed after changing Keyboard layout. 6) Press ENTER. Note: If you forget the admin password the only way to reset it is to reinstall Messaging Security Product. Change the Network Settings 1) To change the network settings, select <Yes>. 2) Enter Yes. 4 3) Enter the IP address of the appliance. 4) Enter the subnet mask of the appliance. 5) Enter the IP address of the default gateway. 6) Enter the host name of the appliance. 7) Enter the domain name. 8) Enter the IP addresses of at least two DNS servers that the appliance uses: 9) Enter hostname override settings to hosts file if your network configurations need that. 5 10) Confirm the network settings. To save the settings, press ENTER. 11) After the settings have been saved, press ENTER. Change the Keyboard 1) In the F-Secure Messaging Security Gateway menu , select Console Keyboard Selector. Note: It is recommended to type the old password with the US keyboard localization in to a text file to verify that all characters can be accessed through the new desired keyboard localization. 6 2) Select the preferred keyboard from the list. Press ENTER. 3) To confirm the change, select <Yes> and press ENTER. 7 4) To return to the main menu, press ENTER again. Enable SSH 1) From the main menu, select Advanced System Control Operations. Press ENTER. 9 4) To confirm SSH access to the appliance, select <Yes>. [. . . ] 10) Setting up localization, date & time 17 11) Creating profile for Alerts sent by the Messaging Security Gateway server 12) Insert the email address which receives all the alerts sent by the Messaging Security Gateway 18 13) Click "Finish" to finalize the installation Note: At this point the Messaging Security Gateway server needs to have access to Internet otherwise the registration will not get completed. 14) Congratulations you have succesfully implemented the Messaging Security Gateway and are now ready to use the product 19 [. . . ]