User manual EPSON WORKFORCE WF-2510WF

[. . . ] Epson is not responsible for any use of this information as applied to other products. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions. Seiko Epson Corporation and its affiliates shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as Epson Approved Products by Seiko Epson Corporation. [. . . ] ❏ Although the ink cartridges may contain recycled materials, this does not affect product function or performance. ❏ When printing in monochrome or grayscale, color inks instead of black ink may be used depending on the paper type or print quality settings. This is because a mixture of color inks is used to create black. Checking the Ink Cartridge Status For Windows Note: When an ink cartridge is running low, the Low Ink Reminder screen automatically appears. If you do not want to display this screen, first access the printer driver and then click the Maintenance tab, and then Monitoring Preferences. On the Monitoring Preferences screen, clear the See Low Ink Reminder alerts check box. 34 User’s Guide Replacing Ink Cartridges To check the ink cartridge status, do one of the following: ❏ Open the printer driver, click the Main tab, and then click the Ink Levels button. To add a shortcut icon to the taskbar, see the following section: & “From the shortcut icon on the taskbar” on page 19 ❏ Open the printer driver, click the Maintenance tab, then click the EPSON Status Monitor 3 button. A graphic displays the ink cartridge status. Note: ❏ If EPSON Status Monitor 3 does not appear, access the printer driver and click the Maintenance tab and then the Extended Settings button. In the Extended Settings window, check the Enable EPSON Status Monitor 3 check box. ❏ ❏ Depending on current settings, the simplified status monitor may be displayed. The ink levels displayed are an approximate indication. For Mac OS X You can check the ink cartridge status using EPSON Status Monitor. & “Accessing the printer driver for Mac OS X” on page 19 35 User’s Guide Replacing Ink Cartridges B Click the EPSON Status Monitor icon. Always press the + button to move it. C Press the + button again. If more than one ink cartridge is expended, the ink cartridge holder moves to the you press the + button until all expended ink cartridges have been indicated. mark. This occurs each time Once all of the expended ink cartridges have been indicated, the ink cartridge holder moves to the ink cartridge replacement position when you press the + button. D Pinch and remove the ink cartridge. Note: Removed ink cartridges may have ink around the ink supply port, so be careful not to get any ink on the surrounding area when removing the cartridges. E Gently shake new replacement cartridges four or five times and then unpack. 41 User’s Guide Replacing Ink Cartridges Important: c ❏ Be careful not to break the hooks on the side of the ink cartridge when you remove it from the package. ❏ Do not touch the green IC chip or the small window on the side of the cartridge. Doing so may prevent normal operation and printing. F Remove only the yellow tape. Important: c ❏ You must remove the yellow tape from the cartridge before installing it; otherwise, print quality may decline or you may not be able to print. ❏ ❏ ❏ If you have installed an ink cartridge without removing the yellow tape, take the cartridge out of the product, remove the yellow tape, and then reinstall it. Do not remove the transparent seal from the bottom of the cartridge; otherwise, the cartridge may become unusable. Do not remove or tear the label on the cartridge; otherwise, ink will leak. 42 User’s Guide Replacing Ink Cartridges G Insert the cartridge and press it until it clicks. Make sure the top surface of the ink cartridges align. H Close the printer cover and press +. This process takes about one and a half minutes to complete. Note: The P light continues to flash while the product is charging ink. If the ink charging is incomplete, you may not be able to print. Ink cartridge replacement is complete. [. . . ] & “Uninstalling Your Software” on page 56 An ink error is indicated after you replace the cartridge A Open the printer cover. B Make sure the ink cartridge holder is at the ink cartridge replacement position. Note: If the ink cartridge holder is at the far right position, press the + button. The cartridge that is expended or low is indicated by the press the + button again. The ink cartridge holder moves to the ink cartridge replacement position. C Remove and reinsert the ink cartridge and then continue with the ink cartridge installation. Make sure the top surface of the ink cartridges align. D Close the printer cover, and press the + button in the control panel. 71 User’s Guide Troubleshooting for Printing Increasing the Print Speed (For Windows Only) Print speed may be increased by selecting certain settings in the Extended Settings window when the printing speed is slow. [. . . ]