User manual EPSON MOVERIO BT-100

[. . . ] If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. € Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. € Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. [. . . ] Do not wear this product when driving, cooking, or performing any other dangerous tasks. Warning Risk of interference with other electronic devices Check that there is no medical equipment in the area before use as this product may cause electromagnetic interference on medical equipment or cause the equipment to malfunction. If you have an implanted pacemaker or implanted defibrillator, make sure you keep a distance of at least 22 cm between this product and the implanted device when using the wireless LAN. Before use, make sure that there is no one with a pacemaker near you, and if you are in a crowded location such as a train, turn off this product or stop the electromagnetic waves. Do not use this product near automatically controlled devices such as automatic doors or fire alarms because it may cause electromagnetic interference which could cause an accident to occur or the devices to malfunction. In locations where usage is restricted, such as on aircraft or in hospitals, follow the on-site rules (such as airplane announcements). Caution Risk of fire, electric shock, or accident For safety reasons, when you have finished using this product, make sure you turn it off. When performing maintenance, make sure you unplug the AC adapter and disconnect all wires. Caution Risk of burns Do not touch the hot sections of the AC adapter for a while after use. Do not use this product for extended periods of time if the controller is touching any part of your skin. EN 05 Caution Risk of impaired vision Caution Risk of deterioration in image quality When wearing this product, do not look directly at the sun or at any bright lights. Pressing the [ ] power button for less than two seconds turns sleep mode on or off. EN 09 Wearing the Headset 1 Put on the headset and make adjustments so that you can see the whole screen. Getting Ready Use both hands to open the arms, and then put on the headset. Press and slide If you cannot view the top or bottom of the screen, remove the lens shade and replace the nose pad. As shown in the illustration above, use the switches to widen the arms to fit your head. (The switches allow you to adjust the width in three stages with the widest setting at the top and the narrowest at the bottom. While wearing your glasses, lower the headset from the top of your head to put it on. The headset is supported by the glasses hooks resting on the frame of your glasses. € Depending on the shape of your glasses, you may not be able to wear the headset. If the screen height is not correct, try adjusting the position of the glasses hooks. € You can use the replacement nose pad instead of the glasses hooks when wearing the headset over glasses. [. . . ] EN 17 Trademarks & Customer Service Digital User's Guide A Digital User's Guide comes preinstalled with this product. When you want more detailed information, launch the Digital User's Guide from the Home screen. Use the Direction keys to select [ ], and then press the Enter key. Adobe, Flash and the Flash logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. [. . . ]