User manual EPSON EXPRESSION HOME XP-415

[. . . ] button in the EPSON TWAIN Pro or EPSON TWAIN Pro Network dialog box. s Information on PageManager and other Software See the PageManager for EPSON, and other software documentation provided on the EPSON Scanner Software CD-ROM. s Contents Safety Instructions . 23 3 English s Safety Instructions Read all these instructions and save them for later reference. Follow all warnings and instructions marked on the scanner. s Unplug the scanner before cleaning. Do not place the scanner on an unstable surface, or near a radiator or heat source. [. . . ] Place the scanner near a wall outlet where the power cord can be easily unplugged. Allow space behind the scanner for the cables, and space above the scanner so that you can fully raise the document cover. Keep the scanner away from high temperatures, humidity and excessive dirt or dust. Also avoid using or storing the scanner in places subject to rapid changes of temperature and humidity. Avoid places subject to shocks and vibrations. s s s s s Releasing the Transportation Lock When the scanner is unpacked, the carriage is locked in the home position to prevent damage from shaking or vibration during transportation. You must release the transportation lock before you can use the scanner. Place the scanner on a flat, stable surface with its left side facing you. Turn the transportation lock to the unlocked position using a coin or a similar object, as shown below. Note: Before you transport the scanner or store it for an extended period of time, secure the carriage by turning the transportation lock back to the locked position. For more information, see "Maintenance and Troubleshooting" in your Online Reference Guide. Setting Up the Scanner 11 English Place the scanner on a flat, stable surface. The scanner will not operate properly if it is tilted at an angle. Plugging In the Scanner 1. The scanner is off when the button is raised. P OPERATE 2. If the power cord is not attached to the scanner, connect it to the AC inlet on the back of the scanner, and plug the other end into a properly grounded electrical outlet. c 1. Caution: It is not possible to change the scanner's voltage. When this happens, follow the instructions in Chapter 3 in the online Setup Guide, then install the software. t Connect the USB cable to your computer, then install or start the scanner software. Do not connect or disconnect the USB cable while the scanner software is open. Make sure no other interface is used. t 20 Connecting the Scanner to Your Computer s Using the Online Manuals The CD-ROM shipped with your scanner includes three different online manuals in PDF format (PDF = Portable Document Format). Windows, Macintosh, Unix etc. ) and are electronic manuals with the same layout, illustrations, tables etc. You can display the online manuals on your computer screen and print them on any connected printer, if required. The following three manuals are available: s Setup Guide The Setup Guide shows how to set up the scanner and calibarate the screen, how to install the scanner software and options, and how to use the scanner and make basic scans. It also shows how to make basic software settings and use the Start Button function. s EPSON Scanner Server & EPSON TWAIN Pro Network User's Guide Provides detailed instructions for installing and using EPSON Scan Server and EPSON TWAIN Pro Network software. s EPSON Scanner Software Reference Guide Provides basic information about scanning and details on EPSON TWAIN Pro and other EPSON scanner software. Descriptions of EPSON TWAIN Pro also apply to EPSON TWAIN Pro Network. Finally, it offers troubleshooting tips and customer support information. To access these manuals you need to install the Adobe® Acrobat® ReaderTM software, which is also provided on the CD-ROM. Note: The Adobe Acrobat Reader program is an easy-to-use application program for displaying and printing online manuals. It offers a wide range of features which allow you to use the online manuals without difficulty to find any desired information. [. . . ] Insert the EPSON Online manual CD-ROM into your computer's CD-ROM drive. Windows 95/98/NT 4. 0/2000: The setup program on the CD-ROM will be started automatically and displays the start screen. If the setup program is not started automatically, click the Start button, then click Run and enter the command E:\Start. exe to start the setup program. Note: If your CD-ROM drive has a drive letter other than E, substitute the appropriate letter. [. . . ]