User manual EPSON EXPRESSION 10000XL PRO REFERENCE GUIDE

[. . . ] Install button. 9 10 11 Install button and Exit button to close the installer, and then If you want to use any of the bonus software included with your scanner, insert the CD-ROM for the software you want to install, and follow the on-screen instructions. Macintosh OS 9 1 Insert the Scanner Software CD-ROM in your CD-ROM or DVD drive. Epson 2 3 When you see this screen, select Install Software, and then click the Install button. When the installation is complete, leave the CD-ROM in the computer and click Restart. Select Register Your Scanner, then click the Install button and register as instructed. [. . . ] Select Register Your Scanner, then click the Install button and register as instructed. When done, click the Exit button to close the installer, and then remove the CD-ROM. 4 5 6 7 8 9 10 If you want to use any of the bonus software included with your scanner, insert the CD-ROM for the software you want to install, and follow the on-screen instructions. 3 Connect the Scanner Note: If you are installing the optional Network Image Express card, see the instructions in the User's Guide. 1 Connect the scanner to your computer. If you're using USB . . Plug the square end of the USB cable into the scanner's USB port. Then plug the flat end into any available USB port on your computer or USB hub. If you're using IEEE 1394 (FireWire®) . . Plug one end of the IEEE 1394 cable (not included) into the scanner's IEEE 1394 port. Then plug the other end into the IEEE 1394 port on your computer. 2 Slide the transportation lock (the tab over the AC connector) up to the Unlock position. 3 4 Plug the scanner's power cord into the AC connector. The green Ready light blinks for about 30 seconds during initialization, and then stays on when the scanner is ready to use. Power button Caution: If you turn off the scanner, wait at least 10 seconds before turning it back on. Getting the Most from Your Scanner Your scanner includes various features that enable you to create professional, high-quality scans. It also includes bonus software such as Adobe Photoshop Elements and ABBYY FineReader Sprint (described in your User's Guide), MonacoEZColor (see below), and LaserSoft Imaging Silverfast (Photo version of the scanner only). Note: For detailed instructions, see the electronic manual for each software application. The SilverFast CD-ROM also contains useful QuickTime® tutorials. Managing Color You can use MonacoEZcolor to calibrate your scanner and ensure that printouts of scanned images closely match the originals. Note: If you've built an ICC profile for your printer (including the specific print settings and type of paper you plan to use), you can select it instead. Now you are ready to print your scanned image. Make sure your printer's color management settings are turned off in your printer software before you begin. If you're using your own ICC profile for the printer, be sure to select the same printer settings and load the same paper that you used when creating the profile. Enhancing Your Photos EPSON Scan includes various filters to improve your photos, including Color Restoration and Dust Removal (for film). For details on using these features, see your User's Guide. Before and after Color Restoration Original photo Before and after Dust Removal Optional Equipment Use these accessories to increase the versatility and productivity of your scanner. Transparency unit (B12B813362) Lets you scan slides, filmstrips, and negatives in a variety of formats. Included with the Photo version of the scanner. Automatic document feeder (B813212) Lets you scan multipage documents, single- or double-sided. Useful for scanning text for editing. Network Image Express interface card (B12B808393) Connects the scanner to your network, making it accessible to multiple users. You can purchase supplies and accessories from the Epson StoreSM by calling (800) 873-7766 or online at www. epsonstore. com (U. S. In Canada, please call (800) 463-7766 for dealer referral. Problems? If your problem is listed here, try these suggestions. If you have not yet installed the software, click Cancel and disconnect the scanner. Make sure the scanner is plugged into your computer, connected to a power source, and turned on. [. . . ] If you have not yet installed the software, click Cancel and disconnect the scanner. Make sure the scanner is plugged into your computer, connected to a power source, and turned on. If you just turned on the scanner, wait until the Ready light stops blinking and remains on. If you're using a USB hub, try connecting the scanner directly to one of the USB ports on your computer. You see a message about a HI-SPEED USB device in Windows XP. [. . . ]