User manual EPSON EMP-3000

[. . . ] Example: [InputA] [Start] Contents Meanings of symbols used Tasks that can be done using EMP Monitor Operating environment 1 4 5 2 Registering several projectors to a monitoring group all at once . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 If the projector name or IP address changes after registration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 For projectors that have been registered manually. . . . . . . . . . . . . . . . . . . . . 15 For projectors that have been registered using automatic search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The details you enter here will be displayed at the projector properties. Select this when you want monitoring to start. Registering several projectors to a monitoring group all at once Projectors that have been registered can then be registered together into different groups so that they can be monitored and controlled together. Furthermore, if you select one of the registered groups as the "Parent group", monitoring and control operations can be carried out for all projectors in that "Parent group". A "Parent group" can be set for other parent groups, so that a hierarchical group arrangement such as the following can be created. Branch A Showroom Showroom A No1 No2 No3 Showroom B No4 No5 Projector01 Projector02 Branch B Conference room 100 101 102 103 Room 1 Room 3 201 202 4 After entering the details, click [Register] to start the registration. The icon(s) of the projector(s) you registered will be displayed in "Grouping view" or "Detail list view". Lobby Convention hall Reception room Branch C Conference room First, create the registration groups, and then register projectors into the groups that have been created. Registering and deleting projectors for monitoring 14 PROCEDURE TIP 1 Right-click in "Grouping view" and select "New" "Group". Make the necessary settings while referring to the table below. · If "Detail list view" is displayed, select "New" - "Group" from the "Edit" menu. You can also carry out this operation by selecting "Group" from "New" in the "Edit" menu. 2 After entering the details, click [Register] to start the registration. The icon(s) of the projector(s) you registered will be displayed in "Grouping view" or "Detail list view". Right-click the projector icon(s) to register to the group you have created in "Grouping view" or "Detail list view", and select "Edit". TIP 3 Group name Display icon Parent group Monitor Enter the name of the group(s) to be displayed in "Grouping view" or "Detail list view". Select the icon(s) to be displayed in "Grouping view" or "Detail list view". Select this to monitor all projectors that have been registered in the group. If this is not selected, the settings made when the individual projectors were registered will be used. *3 Check that the projector has been correctly connected to the network. TIP The projector information that is generated when a problem is detected is stored until EMP Monitor is closed. The EMP Monitor displays will not be updated automatically even if the projector status returns to normal. Click [Refresh] in the main window to update the status. f Using the icons in "Grouping view" The following icon operations can be carried out in "Grouping view". · Expanding and collapsing icons Each time you double-click a group icon, the icons for the projector that have been registered in that group are displayed or hidden. · Moving icons To change the position of an icon within "Grouping view", simply drag and drop the icon to be moved. Monitoring window layout 19 Monitoring using "Detail list view" f Meanings of "Detail list view" icons The status of registered projectors is displayed as a list in "Detail list view" regardless of which groups the projectors belong to. Monitoring disabled The projector is not being monitored. If you right-click the icon and select "Monitoring enabled", the projector will be added to the projectors that are being monitored. Data being updated Network error (monitor password authentication error) No Monitor Password was entered when the projector was registered, or an incorrect Monitor Password was entered. sp. 9, 11, 13 Network error (TCP connection error)*2 Network error (ESC/VP. net communication error)*3 Group name: When projectors are registered to a group, the name of the group that the projector belongs to is displayed. Power on and normal Power on and status abnormal status Power off and normal Power off and status abnormal status Lamp Hours: Shows the lamp operating time for the projector. Temperature level: The following five icons display the differing internal temperature status of the projector. Internal temperature High-temperature normal warning Internal temperature Internal temperature normal error High-temperature warning The icon patterns and their meanings are explained below. [. . . ] The application lock will be cancelled and operations can be carried out as normal. Switching application lock between enabled and disabled f Enabling the lock PROCEDURE Setting a password for cancelling application lock Carry out the following operations while application lock is cancelled. PROCEDURE Select "Application lock" from the "Tool" menu. The application lock will be enabled and no operations will be possible other than opening and closing EMP Monitor and disabling the application lock. f Disabling the lock PROCEDURE 1 2 3 Select "Environment setup" from the "Tool" menu. Select "Change the application lock password". 1 Select "Application unlock" from the "Tool" menu. Enter the password in both the "New password" and "New password (confirm)" boxes and then click [OK]. [. . . ]