User manual EPSON C3900

[. . . ] User's Guide NPD4278-02 EN AcuLaser C3900 Series User's Guide Copyright Notice No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. [. . . ] However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Select this setting when paper that should not be used with double sided copying (for example, when on side has already been printed on) is loaded as plain paper with a weight of 60­90 g/m2. Media Handling 66 AcuLaser C3900 Series User's Guide Capacity Tray 1 Tray 2 Tray 3 Up to 100 sheets, depending on the paper weight. Face down Face up Orientation Tray 1 Tray 2/3 Driver Media Type Weight Duplexing Single Side Only (60­90 g/m2) 60­90 g/m2 Not supported Use single side only paper that is Suitable for plain paper laser printers, such as standard or recycled office paper Plain paper that has been printed on with same printer DO NOT use single side only paper that is Not approved for use as plain paper Special Paper You can print continuously with special paper. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Select this setting when special paper, for example, high-quality paper, is loaded as plain paper with a weight of 60­90 g/m2. Capacity Tray 1 Tray 2 Tray 3 Orientation Tray 1 Tray 2/3 Driver Media Type Up to 100 sheets, depending on the paper weight. Face down Face up Special Paper (60­90 g/m2) Media Handling 67 AcuLaser C3900 Series User's Guide Weight Duplexing 60­90 g/m2 See "Print Media" on page 58 for supported sizes. Use special paper that is Approved for laser printers DO NOT use special paper that is Not approved for use as plain paper Printable Area The printable area on all media sizes is up to 4. 2 mm from the edges of the media. a a a * a a=4. 2 mm * Printable Area Each media size has a specific printable area (the maximum area on which the printer can print clearly and without distortion). This area is subject to both hardware limits (the physical media size and the margins required by the printer) and software constraints (the amount of memory available for the full-page frame buffer). The printable area for all media sizes is the page size minus 4. 2 mm from all edges of the media. Note: When printing in color on legal-size media, the following limitations apply. (However, there is a non-printable area up to 4. 2 mm from the leading edge. ) Media Handling 68 AcuLaser C3900 Series User's Guide The bottom margin is 14. 2 mm. Envelopes Envelopes can only be printed on their front sides (side where the recipient's address is written). In addition, printing on the front side in the area overlapping the back flap cannot be guaranteed. The location of this area differs depending on the envelope type. 1 2 a a a 3 a a=4. 2 mm Front side (can be printed) 1. Guaranteed printable area Back side (cannot be printed) Note: The envelope print orientation is determined by your application. Page Margins Margins are set through your application. Some applications allow you to set custom page sizes and margins while others have only standard page sizes and margins from which to choose. If you choose a standard format, you may lose part of your image (due to printable area constraints). If you can custom-size your page in your application, use those sizes given for the printable area for optimum results. Media Handling 69 AcuLaser C3900 Series User's Guide Loading Media Note: Do not mix media of different types and sizes, as this will cause media misfeeds or machine trouble. Stack it with the new media, even the edges, then reload it. Tray 1 (Manual Feed Tray) For details on the types and sizes of media that can be printed from Tray 1, refer to "Print Media" on page 58. Slide the media guides to provide more space between them. Media Handling 70 AcuLaser C3900 Series User's Guide 3. Press down on the center of the paper-lifting plate until the left and right locking tabs (white) lock into place. 4. Load the paper face down in the tray. Note: Do not load so much paper that the top of the stack is higher than the maximum limit guide. [. . . ] Dual in-line memory module (or DIMM) is compact circuit board with surface-mount memory chips. There is 256 MB of onboard memory and one available memory expansion slot. The memory can be expanded to a maximum of 768 MB (256 MB + 512 MB). Installing a DIMM Note: It's very important to protect the printer controller board and any associated circuit boards from electrostatic damage. Before performing this procedure, review the antistatic caution on "Antistatic Protection" on page 146. [. . . ]